MMCT BYPASS SHELL
:
216.73.216.98
:
91.213.11.35 / forkliftsafetysystems.com
:
Linux mgh-web6.maghost.ro 4.18.0-553.54.1.lve.el8.x86_64 #1 SMP Wed Jun 4 13:01:13 UTC 2025 x86_64
:
/
proc
/
thread-self
/
cwd
/
UPLOAD FILE:
files >> //proc/thread-self/cwd/rules.d.tar
64-md-raid-assembly.rules 0000644 00000004500 15063561400 0011200 0 ustar 00 # do not edit this file, it will be overwritten on update # Don't process any events if anaconda is running as anaconda brings up # raid devices manually ENV{ANACONDA}=="?*", GOTO="md_inc_end" # assemble md arrays # Also don't process disks that are slated to be a multipath device ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="md_inc_end" SUBSYSTEM!="block", GOTO="md_inc_end" # skip non-initialized devices ENV{SYSTEMD_READY}=="0", GOTO="md_inc_end" # handle potential components of arrays (the ones supported by md) # For member devices which are md/dm devices, we don't need to # handle add event. Because md/dm devices need to do some init jobs. # Then the change event happens. # When adding md/dm devices, ID_FS_TYPE can only be linux_raid_member # after change event happens. ENV{ID_FS_TYPE}=="linux_raid_member", GOTO="md_inc" # "noiswmd" on kernel command line stops mdadm from handling # "isw" (aka IMSM - Intel RAID). # "nodmraid" on kernel command line stops mdadm from handling # "isw" or "ddf". IMPORT{cmdline}="noiswmd" IMPORT{cmdline}="nodmraid" ENV{nodmraid}=="?*", GOTO="md_inc_end" ENV{ID_FS_TYPE}=="ddf_raid_member", GOTO="md_inc" ENV{noiswmd}=="?*", GOTO="md_inc_end" ENV{ID_FS_TYPE}=="isw_raid_member", ACTION!="change", GOTO="md_inc" GOTO="md_inc_end" LABEL="md_inc" # Make sure we don't handle dm devices when some limits are set. # And linux_raid_member only be set when change/remove event happen. # So we don't need to consider add event here. KERNEL=="dm-*", ENV{DM_UDEV_RULES_VSN}!="?*", GOTO="md_inc_end" KERNEL=="dm-*", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="md_inc_end" KERNEL=="dm-*", ENV{DM_SUSPENDED}=="1", GOTO="md_inc_end" # Bare disks are ready when add event happens, the raid can be assembled. ACTION=="change", KERNEL!="dm-*|md*", GOTO="md_inc_end" # remember you can limit what gets auto/incrementally assembled by # mdadm.conf(5)'s 'AUTO' and selectively whitelist using 'ARRAY' ACTION!="remove", IMPORT{program}="/usr/sbin/mdadm --incremental --export $devnode --offroot $env{DEVLINKS}" ACTION!="remove", ENV{MD_STARTED}=="*unsafe*", ENV{MD_FOREIGN}=="no", ENV{SYSTEMD_WANTS}+="mdadm-last-resort@$env{MD_DEVICE}.timer" ACTION=="remove", ENV{ID_PATH}=="?*", RUN+="/usr/sbin/mdadm -If $name --path $env{ID_PATH}" ACTION=="remove", ENV{ID_PATH}!="?*", RUN+="/usr/sbin/mdadm -If $name" LABEL="md_inc_end" 11-dm-parts.rules 0000644 00000002642 15063561400 0007572 0 ustar 00 # Rules for partitions created by kpartx KERNEL!="dm-*", GOTO="dm_parts_end" ACTION!="add|change", GOTO="dm_parts_end" ENV{DM_UUID}!="part[0-9]*", GOTO="dm_parts_end" # We must take care that symlinks don't get lost, # even if blkid fails in 13-dm-disk.rules later. # # Fixme: we have currently no way to avoid calling blkid on # partitions of broken mpath maps such as DM_NOSCAN. # But when partition devices appear, kpartx has likely read # the partition table shortly before, so odds are not bad # that blkid will also succeed. IMPORT{db}="ID_FS_USAGE" IMPORT{db}="ID_FS_UUID_ENC" IMPORT{db}="ID_FS_LABEL_ENC" IMPORT{db}="ID_PART_ENTRY_NAME" IMPORT{db}="ID_PART_ENTRY_UUID" IMPORT{db}="ID_PART_ENTRY_SCHEME" # Maps should take precedence over their members. ENV{DM_UDEV_LOW_PRIORITY_FLAG}!="1", OPTIONS+="link_priority=50" # Set some additional symlinks that typically exist for mpath # path members, too, and should be overridden. # # kpartx_id is very robust, it works for suspended maps and maps # with 0 dependencies. It sets DM_TYPE, DM_PART, DM_WWN IMPORT{program}=="kpartx_id %M %m $env{DM_UUID}" # DM_TYPE only has a reasonable value for partitions on multipath. ENV{DM_UUID}=="*-mpath-*", ENV{DM_TYPE}=="?*", ENV{DM_SERIAL}=="?*" \ SYMLINK+="disk/by-id/$env{DM_TYPE}-$env{DM_SERIAL}-part$env{DM_PART}" ENV{DM_WWN}=="?*", ENV{DM_PART}=="?*", \ SYMLINK+="disk/by-id/wwn-$env{DM_WWN}-part$env{DM_PART}" LABEL="dm_parts_end" 66-kpartx.rules 0000644 00000002175 15063561400 0007367 0 ustar 00 # # persistent links for device-mapper devices # only hardware-backed device-mapper devices (ie multipath, dmraid, # and kpartx) have meaningful persistent device names # KERNEL!="dm-*", GOTO="kpartx_end" ACTION!="add|change", GOTO="kpartx_end" ENV{DM_UUID}!="?*", GOTO="kpartx_end" # Create dm tables for partitions on multipath devices. ENV{DM_UUID}!="mpath-?*", GOTO="mpath_kpartx_end" # DM_SUBSYSTEM_UDEV_FLAG1 is the "skip_kpartx" flag. # For events not generated by libdevmapper, we need to fetch it from db. ENV{DM_UDEV_PRIMARY_SOURCE_FLAG}!="1", IMPORT{db}="DM_SUBSYSTEM_UDEV_FLAG1" ENV{DM_SUBSYSTEM_UDEV_FLAG1}=="1", GOTO="mpath_kpartx_end" # 11-dm-mpath.rules sets MPATH_UNCHANGED for events that can be ignored. ENV{MPATH_UNCHANGED}=="1", GOTO="mpath_kpartx_end" # Don't run kpartx now if we know it will fail or hang. ENV{DM_SUSPENDED}=="1", GOTO="mpath_kpartx_end" ENV{DM_NOSCAN}=="1", GOTO="mpath_kpartx_end" # Run kpartx GOTO="run_kpartx" LABEL="mpath_kpartx_end" ## Code for other subsystems (non-multipath) could be placed here ## GOTO="kpartx_end" LABEL="run_kpartx" RUN+="/sbin/kpartx -un /dev/$name" LABEL="kpartx_end" 61-scsi-sg3_id.rules 0000644 00000011251 15063561400 0010153 0 ustar 00 # SCSI-ID mappings for sg3_utils ACTION=="remove", GOTO="sg3_utils_id_end" SUBSYSTEM!="block", GOTO="sg3_utils_id_end" # Import values for partitions ENV{DEVTYPE}=="partition", IMPORT{parent}="SCSI_*", ENV{ID_SCSI}="1" # SCSI INQUIRY values # If the 'inquiry' sysfs attribute is present the kernel will already # have scanned for VPD pages, so if the vpd page attribute is not # present it is not supported (or deemed unsafe to access). # Hence we can skip the call to sg_inq and avoid I/O altogether. # Set 'ID_SCSI_INQUIRY=0' in an earlier udev rule if the kernel # fails to scan VPD pages correctly; the rules will then fall # back to calling sg_vpd directly. KERNEL=="sd*[!0-9]|sr*", ENV{ID_SCSI_INQUIRY}!="?*", IMPORT{program}="/usr/bin/sg_inq --export --inhex=/sys/block/$kernel/device/inquiry --raw", ENV{ID_SCSI}="1", ENV{ID_SCSI_INQUIRY}="1" KERNEL=="sd*[!0-9]|sr*", ENV{ID_SCSI}!="1", IMPORT{program}="/usr/bin/sg_inq --export $tempnode", ENV{ID_SCSI}="1" # scsi_id compat mappings ENV{SCSI_VENDOR}=="?*", ENV{ID_VENDOR}="$env{SCSI_VENDOR}" ENV{SCSI_VENDOR_ENC}=="?*", ENV{ID_VENDOR_ENC}="$env{SCSI_VENDOR_ENC}" ENV{SCSI_MODEL}=="?*", ENV{ID_MODEL}="$env{SCSI_MODEL}" ENV{SCSI_MODEL_ENC}=="?*", ENV{ID_MODEL_ENC}="$env{SCSI_MODEL_ENC}" ENV{SCSI_REVISION}=="?*", ENV{ID_REVISION}="$env{SCSI_REVISION}" ENV{SCSI_TYPE}=="?*", ENV{ID_TYPE}="$env{SCSI_TYPE}" # SCSI EVPD page 0x80 values KERNEL=="sd*[!0-9]|sr*", ENV{ID_SCSI}=="1", ENV{ID_SCSI_INQUIRY}=="1", IMPORT{program}="/usr/bin/sg_inq --export --inhex=/sys/block/$kernel/device/vpd_pg80 --raw" KERNEL=="sd*[!0-9]|sr*", ENV{ID_SCSI}=="1", ENV{ID_SCSI_INQUIRY}!="1", IMPORT{program}="/usr/bin/sg_inq --export --page=sn $tempnode" # SCSI EVPD page 0x83 values KERNEL=="sd*[!0-9]", ENV{ID_SCSI}=="1", ENV{ID_SCSI_INQUIRY}=="1", IMPORT{program}="/usr/bin/sg_inq --export --inhex=/sys/block/$kernel/device/vpd_pg83 --raw" KERNEL=="sd*[!0-9]|sr*", ENV{ID_SCSI}=="1", ENV{ID_SCSI_INQUIRY}!="1", IMPORT{program}="/usr/bin/sg_inq --export --page=di $tempnode" # ID_WWN compat mapping ENV{SCSI_IDENT_LUN_NAA_REGEXT}=="?*", ENV{ID_WWN}!="?*", ENV{ID_WWN}="0x$env{SCSI_IDENT_LUN_NAA_REGEXT}" ENV{SCSI_IDENT_LUN_NAA_REG}=="?*", ENV{ID_WWN}!="?*", ENV{ID_WWN}="0x$env{SCSI_IDENT_LUN_NAA_REG}" ENV{SCSI_IDENT_LUN_NAA_EXT}=="?*", ENV{ID_WWN}!="?*", ENV{ID_WWN}="0x$env{SCSI_IDENT_LUN_NAA_EXT}" ENV{SCSI_IDENT_LUN_NAA_LOCAL}=="?*", ENV{ID_WWN}!="?*", ENV{ID_WWN}="0x$env{SCSI_IDENT_LUN_NAA_LOCAL}" ENV{SCSI_IDENT_LUN_NAA_REGEXT}=="?*", ENV{ID_WWN_WITH_EXTENSION}!="?*", ENV{ID_WWN_WITH_EXTENSION}="0x$env{SCSI_IDENT_LUN_NAA_REGEXT}" ENV{SCSI_IDENT_LUN_NAA_EXT}=="?*", ENV{ID_WWN_WITH_EXTENSION}!="?*", ENV{ID_WWN_WITH_EXTENSION}="0x$env{SCSI_IDENT_LUN_NAA_EXT}" ENV{ID_WWN}=="?*", ENV{ID_WWN_WITH_EXTENSION}!="?*", ENV{ID_WWN_WITH_EXTENSION}="$env{ID_WWN}" # ata_id compability ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_ATA}=="?*", ENV{ID_BUS}="ata", ENV{ID_ATA}="1", ENV{ID_SERIAL}="$env{SCSI_IDENT_LUN_ATA}" ENV{ID_SERIAL_SHORT}!="?*", ENV{SCSI_VENDOR}=="ATA", ENV{SCSI_IDENT_LUN_VENDOR}=="?*", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_VENDOR}" # Compat ID_SERIAL setting ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_NAA_REGEXT}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="3$env{SCSI_IDENT_LUN_NAA_REGEXT}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_NAA_REGEXT}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_NAA_REG}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="3$env{SCSI_IDENT_LUN_NAA_REG}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_NAA_REG}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_NAA_EXT}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="3$env{SCSI_IDENT_LUN_NAA}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_NAA_EXT}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_EUI64}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="2$env{SCSI_IDENT_LUN_EUI64}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_EUI64}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_NAME}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="8$env{SCSI_IDENT_LUN_NAME}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_NAME}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_T10}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="1$env{SCSI_IDENT_LUN_T10}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_T10}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_NAA_LOCAL}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="3$env{SCSI_IDENT_LUN_NAA_LOCAL}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_NAA_LOCAL}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_VENDOR}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="0$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_LUN_VENDOR}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_VENDOR}" ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_SERIAL}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="S$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_SERIAL}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_SERIAL}" LABEL="sg3_utils_id_end" 68-del-part-nodes.rules 0000644 00000002166 15063561400 0010676 0 ustar 00 # These rules can delete partitions devnodes for slave devices # for certain aggregate devices such as multipath. # This is desirable to avoid confusion and keep the number # of device nodes and symlinks within limits. # # This is done only once on the first "add" or "change" event for # any given device. # # To suppress this, use the kernel parameter "dont_del_part_nodes", # or create an udev rule file that sets ENV{DONT_DEL_PART_NODES}="1". SUBSYSTEM!="block", GOTO="end_del_part_nodes" KERNEL!="sd*|dasd*", GOTO="end_del_part_nodes" ACTION!="add|change", GOTO="end_del_part_nodes" ENV{DEVTYPE}=="partition", GOTO="end_del_part_nodes" IMPORT{cmdline}="dont_del_part_nodes" ENV{dont_del_part_nodes}=="1", GOTO="end_del_part_nodes" ENV{DONT_DEL_PART_NODES}=="1", GOTO="end_del_part_nodes" # dm-multipath ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="del_part_nodes" # Other aggregate device types can be added here. GOTO="end_del_part_nodes" LABEL="del_part_nodes" IMPORT{db}="DM_DEL_PART_NODES" ENV{DM_DEL_PART_NODES}!="1", ENV{DM_DEL_PART_NODES}="1", \ RUN+="/usr/sbin/partx -d --nr 1-1024 $env{DEVNAME}" LABEL="end_del_part_nodes" 10-dm.rules 0000444 00000016142 15063561400 0006440 0 ustar 00 # Copyright (C) 2009 Red Hat, Inc. All rights reserved. # # This file is part of LVM2. # Udev rules for device-mapper devices. # # These rules create a DM control node in /dev/mapper directory. # The rules also create nodes named dm-x (x is a number) in /dev # directory and symlinks to these nodes with names given by # the actual DM names. Some udev environment variables are set # for use in later rules: # DM_NAME - actual DM device's name # DM_UUID - UUID set for DM device (blank if not specified) # DM_SUSPENDED - suspended state of DM device (0 or 1) # DM_UDEV_RULES_VSN - DM udev rules version # # These rules cover only basic device-mapper functionality in udev. # # Various DM subsystems may contain further subsystem-specific rules # in 11-dm-<subsystem_name>.rules which should be installed together # with the DM subsystem and which extend these basic rules. # For example: # 11-dm-lvm.rules for LVM subsystem # 11-dm-mpath.rules for multipath subsystem (since version 0.6.0, recommended!) # # Even more specific rules may be required by subsystems so always # check subsystem's upstream repository for recent set of rules. # Also, keep in mind that recent rules may also require recent # subsystem-specific binaries. KERNEL=="device-mapper", NAME="mapper/control" SUBSYSTEM!="block", GOTO="dm_end" KERNEL!="dm-[0-9]*", GOTO="dm_end" # Device created, major and minor number assigned - "add" event generated. # Table loaded - no event generated. # Device resumed (or renamed) - "change" event generated. # Device removed - "remove" event generated. # # The dm-X nodes are always created, even on "add" event, we can't suppress # that (the node is created even earlier with devtmpfs). All the symlinks # (e.g. /dev/mapper) are created in right time after a device has its table # loaded and is properly resumed. For this reason, direct use of dm-X nodes # is not recommended. ACTION!="add|change", GOTO="dm_end" # Decode udev control flags and set environment variables appropriately. # These flags are encoded in DM_COOKIE variable that was introduced in # kernel version 2.6.31. Therefore, we can use this feature with # kernels >= 2.6.31 only. Cookie is not decoded for remove event. ENV{DM_COOKIE}=="?*", IMPORT{program}="/usr/sbin/dmsetup udevflags $env{DM_COOKIE}" # Rule out easy-to-detect inappropriate events first. ENV{DISK_RO}=="1", GOTO="dm_disable" # There is no cookie set nor any flags encoded in events not originating # in libdevmapper so we need to detect this and try to behave correctly. # For such spurious events, regenerate all flags from current udev database content # (this information would normally be inaccessible for spurious ADD and CHANGE events). ENV{DM_UDEV_PRIMARY_SOURCE_FLAG}=="1", ENV{DM_ACTIVATION}="1", GOTO="dm_flags_done" IMPORT{db}="DM_UDEV_DISABLE_DM_RULES_FLAG" IMPORT{db}="DM_UDEV_DISABLE_SUBSYSTEM_RULES_FLAG" IMPORT{db}="DM_UDEV_DISABLE_DISK_RULES_FLAG" IMPORT{db}="DM_UDEV_DISABLE_OTHER_RULES_FLAG" IMPORT{db}="DM_UDEV_LOW_PRIORITY_FLAG" IMPORT{db}="DM_UDEV_DISABLE_LIBRARY_FALLBACK_FLAG" IMPORT{db}="DM_UDEV_PRIMARY_SOURCE_FLAG" IMPORT{db}="DM_UDEV_FLAG7" IMPORT{db}="DM_UDEV_RULES_VSN" LABEL="dm_flags_done" # Normally, we operate on "change" events. But when coldplugging, there's an # "add" event present. We have to recognize this and do our actions in this # particular situation, too. Also, we don't want the nodes to be created # prematurely on "add" events while not coldplugging. We check # DM_UDEV_PRIMARY_SOURCE_FLAG to see if the device was activated correctly # before and if not, we ignore the "add" event totally. This way we can support # udev triggers generating "add" events (e.g. "udevadm trigger --action=add" or # "echo add > /sys/block/<dm_device>/uevent"). The trigger with "add" event is # also used at boot to reevaluate udev rules for all existing devices activated # before (e.g. in initrd). If udev is used in initrd, we require the udev init # script to not remove the existing udev database so we can reuse the information # stored at the time of device activation in the initrd. ACTION!="add", GOTO="dm_no_coldplug" ENV{DM_UDEV_RULES_VSN}!="1", ENV{DM_UDEV_PRIMARY_SOURCE_FLAG}!="1", GOTO="dm_disable" ENV{DM_ACTIVATION}="1" LABEL="dm_no_coldplug" # Putting it together, following table is used to recognize genuine and spurious events. # N.B. Spurious events are generated based on use of the WATCH udev # rule or by triggering an event manually by "udevadm trigger" call # or by "echo <event_name> > /sys/block/dm-X/uevent". # # EVENT DM_UDEV_PRIMARY_SOURCE_FLAG DM_ACTIVATION # ====================================================================== # add event (genuine) 0 0 # change event (genuine) 1 1 # add event (spurious) # |_ dev still not active 0 0 # \_ dev already active 1 1 # change event (spurious) # |_ dev still not active 0 0 # \_ dev already active 1 0 # "dm" sysfs subdirectory is available in newer versions of DM # only (kernels >= 2.6.29). We have to check for its existence # and use dmsetup tool instead to get the DM name, uuid and # suspended state if the "dm" subdirectory is not present. # The "suspended" item was added even later (kernels >= 2.6.31), # so we also have to call dmsetup if the kernel version used # is in between these releases. TEST=="dm", ENV{DM_NAME}="$attr{dm/name}", ENV{DM_UUID}="$attr{dm/uuid}", ENV{DM_SUSPENDED}="$attr{dm/suspended}" TEST!="dm", IMPORT{program}="/usr/sbin/dmsetup info -j %M -m %m -c --nameprefixes --noheadings --rows -o name,uuid,suspended" ENV{DM_SUSPENDED}!="?*", IMPORT{program}="/usr/sbin/dmsetup info -j %M -m %m -c --nameprefixes --noheadings --rows -o suspended" # dmsetup tool provides suspended state information in textual # form with values "Suspended"/"Active". We translate it to # 0/1 respectively to be consistent with sysfs values. ENV{DM_SUSPENDED}=="Active", ENV{DM_SUSPENDED}="0" ENV{DM_SUSPENDED}=="Suspended", ENV{DM_SUSPENDED}="1" # This variable provides a reliable way to check that device-mapper # rules were installed. It means that all needed variables are set # by these rules directly so there's no need to acquire them again # later. Other rules can alternate the functionality based on this # fact (e.g. fallback to rules that behave correctly even without # these rules installed). It also provides versioning for any # possible future changes. # VSN 1 - original rules # VSN 2 - add support for synthesized events ENV{DM_UDEV_RULES_VSN}="2" ENV{DM_UDEV_DISABLE_DM_RULES_FLAG}!="1", ENV{DM_NAME}=="?*", SYMLINK+="mapper/$env{DM_NAME}" # Avoid processing and scanning a DM device in the other (foreign) # rules if it is in suspended state. However, we still keep 'disk' # and 'DM subsystem' related rules enabled in this case. ENV{DM_SUSPENDED}=="1", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}="1" GOTO="dm_end" LABEL="dm_disable" ENV{DM_UDEV_DISABLE_SUBSYSTEM_RULES_FLAG}="1" ENV{DM_UDEV_DISABLE_DISK_RULES_FLAG}="1" ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}="1" OPTIONS:="nowatch" LABEL="dm_end" 13-dm-disk.rules 0000444 00000003402 15063561400 0007366 0 ustar 00 # Copyright (C) 2009 Red Hat, Inc. All rights reserved. # # This file is part of LVM2. # Udev rules for device-mapper devices. # # These rules create symlinks in /dev/disk directory. # Symlinks that depend on probing filesystem type, # label and uuid are created only if the device is not # suspended. # "add" event is processed on coldplug only! ACTION!="add|change", GOTO="dm_end" ENV{DM_UDEV_RULES_VSN}!="?*", GOTO="dm_end" ENV{DM_UDEV_DISABLE_DISK_RULES_FLAG}=="1", GOTO="dm_end" SYMLINK+="disk/by-id/dm-name-$env{DM_NAME}" ENV{DM_UUID}=="?*", SYMLINK+="disk/by-id/dm-uuid-$env{DM_UUID}" ENV{DM_SUSPENDED}=="1", GOTO="dm_end" ENV{DM_NOSCAN}=="1", GOTO="dm_watch" IMPORT{builtin}="blkid" ENV{DM_UDEV_LOW_PRIORITY_FLAG}=="1", OPTIONS="link_priority=-100" ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}" ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}" ENV{ID_PART_ENTRY_UUID}=="?*", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}" ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_NAME}=="?*", SYMLINK+="disk/by-partlabel/$env{ID_PART_ENTRY_NAME}" ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_GPT_AUTO_ROOT}=="1", SYMLINK+="gpt-auto-root" # Add inotify watch to track changes on this device. # Using the watch rule is not optimal - it generates a lot of spurious # and useless events whenever the device opened for read-write is closed. # The best would be to generete the event directly in the tool changing # relevant information so only relevant events will be processed # (like creating a filesystem, changing filesystem label etc.). # # But let's use this until we have something better... LABEL="dm_watch" OPTIONS+="watch" LABEL="dm_end" 95-dm-notify.rules 0000444 00000000743 15063561400 0007763 0 ustar 00 # Copyright (C) 2009 Red Hat, Inc. All rights reserved. # # This file is part of LVM2. # Udev rules for device-mapper devices. # # These rules are responsible for sending a notification to a process # waiting for completion of udev rules. The process is identified by # a cookie value sent within "change" and "remove" events (the cookie # value is set before by that process for every action requested). ENV{DM_COOKIE}=="?*", RUN+="/usr/sbin/dmsetup udevcomplete $env{DM_COOKIE}" 60-raw.rules 0000644 00000000506 15063561400 0006635 0 ustar 00 # # Enter raw device bindings here. # # An example would be: # ACTION=="add", KERNEL=="sda", RUN+="/usr/bin/raw /dev/raw/raw1 %N" # to bind /dev/raw/raw1 to /dev/sda, or # ACTION=="add", ENV{MAJOR}=="8", ENV{MINOR}=="1", RUN+="/usr/bin/raw /dev/raw/raw2 %M %m" # to bind /dev/raw/raw2 to the device with major 8, minor 1. 40-elevator.rules 0000644 00000001330 15063561400 0007657 0 ustar 00 # We aren't adding devices skip the elevator check ACTION!="add", GOTO="sched_out" SUBSYSTEM!="block", GOTO="sched_out" ENV{DEVTYPE}!="disk", GOTO="sched_out" # Technically, dm-multipath can be configured to use an I/O scheduler. # However, there are races between the 'add' uevent and the linking in # of the queue/scheduler sysfs file. For now, just skip dm- devices. KERNEL=="dm-*|md*", GOTO="sched_out" # Skip bio-based devices, which don't support an I/O scheduler. ATTR{queue/scheduler}=="none", GOTO="sched_out" # If elevator= is specified on the kernel command line, change the # scheduler to the one specified. IMPORT{cmdline}="elevator" ENV{elevator}!="", ATTR{queue/scheduler}="$env{elevator}" LABEL="sched_out" 40-redhat.rules 0000644 00000003452 15063561400 0007314 0 ustar 00 # do not edit this file, it will be overwritten on update # CPU hotadd request SUBSYSTEM=="cpu", ACTION=="add", TEST=="online", ATTR{online}=="0", ATTR{online}="1" # Memory hotadd request SUBSYSTEM!="memory", GOTO="memory_hotplug_end" ACTION!="add", GOTO="memory_hotplug_end" CONST{arch}=="s390*", GOTO="memory_hotplug_end" CONST{arch}=="ppc64*", GOTO="memory_hotplug_end" ENV{.state}="online" CONST{virt}=="none", ENV{.state}="online_movable" ATTR{state}=="offline", ATTR{state}="$env{.state}" LABEL="memory_hotplug_end" # reload sysctl.conf / sysctl.conf.d settings when the bridge module is loaded ACTION=="add", SUBSYSTEM=="module", KERNEL=="bridge", RUN+="/usr/lib/systemd/systemd-sysctl --prefix=/proc/sys/net/bridge" # load SCSI generic (sg) driver SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST!="[module/sg]", RUN+="/sbin/modprobe -bv sg" SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_target", TEST!="[module/sg]", RUN+="/sbin/modprobe -bv sg" # Rule for prandom character device node permissions KERNEL=="prandom", MODE="0644" # Rules for creating the ID_PATH for SCSI devices based on the CCW bus # using the form: ccw-<BUS_ID>-zfcp-<WWPN>:<LUN> # ACTION=="remove", GOTO="zfcp_scsi_device_end" # # Set environment variable "ID_ZFCP_BUS" to "1" if the devices # (both disk and partition) are SCSI devices based on FCP devices # KERNEL=="sd*", SUBSYSTEMS=="ccw", DRIVERS=="zfcp", ENV{.ID_ZFCP_BUS}="1" # For SCSI disks KERNEL=="sd*[!0-9]", SUBSYSTEMS=="scsi", ENV{.ID_ZFCP_BUS}=="1", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-path/ccw-$attr{hba_id}-zfcp-$attr{wwpn}:$attr{fcp_lun}" # For partitions on a SCSI disk KERNEL=="sd*[0-9]", SUBSYSTEMS=="scsi", ENV{.ID_ZFCP_BUS}=="1", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-path/ccw-$attr{hba_id}-zfcp-$attr{wwpn}:$attr{fcp_lun}-part%n" LABEL="zfcp_scsi_device_end" 63-fc-wwpn-id.rules 0000644 00000001160 15063561400 0010017 0 ustar 00 # # FC WWPN-based by-path links # ACTION!="add|change", GOTO="fc_wwpn_end" KERNEL!="sd*", GOTO="fc_wwpn_end" ENV{DEVTYPE}=="disk", IMPORT{program}="fc_wwpn_id %p" ENV{DEVTYPE}=="partition", IMPORT{parent}="FC_*" ENV{FC_TARGET_WWPN}!="?*", GOTO="fc_wwpn_end" ENV{FC_INITIATOR_WWPN}!="?*", GOTO="fc_wwpn_end" ENV{FC_TARGET_LUN}!="?*", GOTO="fc_wwpn_end" ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-path/fc-$env{FC_INITIATOR_WWPN}-$env{FC_TARGET_WWPN}-lun-$env{FC_TARGET_LUN}" ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-path/fc-$env{FC_INITIATOR_WWPN}-$env{FC_TARGET_WWPN}-lun-$env{FC_TARGET_LUN}-part%n" LABEL="fc_wwpn_end" 50-udev-default.rules 0000644 00000007246 15063561400 0010440 0 ustar 00 # do not edit this file, it will be overwritten on update # run a command on remove events ACTION=="remove", ENV{REMOVE_CMD}!="", RUN+="$env{REMOVE_CMD}" ACTION=="remove", GOTO="default_end" SUBSYSTEM=="virtio-ports", KERNEL=="vport*", ATTR{name}=="?*", SYMLINK+="virtio-ports/$attr{name}" # select "system RTC" or just use the first one SUBSYSTEM=="rtc", ATTR{hctosys}=="1", SYMLINK+="rtc" SUBSYSTEM=="rtc", KERNEL=="rtc0", SYMLINK+="rtc", OPTIONS+="link_priority=-100" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb" ENV{MODALIAS}!="", IMPORT{builtin}="hwdb --subsystem=$env{SUBSYSTEM}" ACTION!="add", GOTO="default_end" SUBSYSTEM=="tty", KERNEL=="ptmx", GROUP="tty", MODE="0666" SUBSYSTEM=="tty", KERNEL=="tty", GROUP="tty", MODE="0666" SUBSYSTEM=="tty", KERNEL=="tty[0-9]*", GROUP="tty", MODE="0620" SUBSYSTEM=="tty", KERNEL=="sclp_line[0-9]*", GROUP="tty", MODE="0620" SUBSYSTEM=="tty", KERNEL=="ttysclp[0-9]*", GROUP="tty", MODE="0620" SUBSYSTEM=="tty", KERNEL=="3270/tty[0-9]*", GROUP="tty", MODE="0620" SUBSYSTEM=="vc", KERNEL=="vcs*|vcsa*", GROUP="tty" KERNEL=="tty[A-Z]*[0-9]|ttymxc[0-9]*|pppox[0-9]*|ircomm[0-9]*|noz[0-9]*|rfcomm[0-9]*", GROUP="dialout" SUBSYSTEM=="mem", KERNEL=="mem|kmem|port", GROUP="kmem", MODE="0640" SUBSYSTEM=="input", GROUP="input" SUBSYSTEM=="input", KERNEL=="js[0-9]*", MODE="0664" SUBSYSTEM=="video4linux", GROUP="video" SUBSYSTEM=="graphics", GROUP="video" SUBSYSTEM=="drm", KERNEL!="renderD*", GROUP="video" SUBSYSTEM=="dvb", GROUP="video" SUBSYSTEM=="media", GROUP="video" SUBSYSTEM=="cec", GROUP="video" SUBSYSTEM=="drm", KERNEL=="renderD*", GROUP="render", MODE="0666" SUBSYSTEM=="kfd", GROUP="render", MODE="0666" SUBSYSTEM=="sound", GROUP="audio", \ OPTIONS+="static_node=snd/seq", OPTIONS+="static_node=snd/timer" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664" SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x00010*", GROUP="video" SUBSYSTEM=="firewire", ATTR{units}=="*0x00b09d:0x00010*", GROUP="video" SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x010001*", GROUP="video" SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x014001*", GROUP="video" KERNEL=="parport[0-9]*", GROUP="lp" SUBSYSTEM=="printer", KERNEL=="lp*", GROUP="lp" SUBSYSTEM=="ppdev", GROUP="lp" KERNEL=="lp[0-9]*", GROUP="lp" KERNEL=="irlpt[0-9]*", GROUP="lp" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp" SUBSYSTEM=="block", GROUP="disk" SUBSYSTEM=="block", KERNEL=="sr[0-9]*", GROUP="cdrom" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", GROUP="cdrom" KERNEL=="sch[0-9]*", GROUP="cdrom" KERNEL=="pktcdvd[0-9]*", GROUP="cdrom" KERNEL=="pktcdvd", GROUP="cdrom" SUBSYSTEM=="scsi_generic|scsi_tape", SUBSYSTEMS=="scsi", ATTRS{type}=="1|8", GROUP="tape" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="0", GROUP="disk" KERNEL=="qft[0-9]*|nqft[0-9]*|zqft[0-9]*|nzqft[0-9]*|rawqft[0-9]*|nrawqft[0-9]*", GROUP="disk" KERNEL=="loop-control", GROUP="disk", OPTIONS+="static_node=loop-control" KERNEL=="btrfs-control", GROUP="disk" KERNEL=="rawctl", GROUP="disk" SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", GROUP="disk" SUBSYSTEM=="aoe", GROUP="disk", MODE="0220" SUBSYSTEM=="aoe", KERNEL=="err", MODE="0440" KERNEL=="rfkill", MODE="0664" KERNEL=="tun", MODE="0666", OPTIONS+="static_node=net/tun" KERNEL=="fuse", MODE="0666", OPTIONS+="static_node=fuse" # The static_node is required on s390x and ppc (they are using MODULE_ALIAS) KERNEL=="kvm", GROUP="kvm", MODE="0666", OPTIONS+="static_node=kvm" SUBSYSTEM=="ptp", ATTR{clock_name}=="KVM virtual PTP", SYMLINK += "ptp_kvm" SUBSYSTEM=="ptp", ATTR{clock_name}=="hyperv", SYMLINK += "ptp_hyperv" LABEL="default_end" 60-alias-kmsg.rules 0000644 00000000545 15063561400 0010077 0 ustar 00 SUBSYSTEM!="block", GOTO="log_end" KERNEL=="loop*|ram*", GOTO="log_end" ACTION=="remove", GOTO="log_end" ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="log_end" ENV{DM_UDEV_DISABLE_DISK_RULES_FLAG}=="1", GOTO="log_end" IMPORT{cmdline}="udev.alias" ENV{udev.alias}=="1", RUN+="/bin/sh -c 'echo udev-alias: $name \($links\) > /dev/kmsg'" LABEL="log_end" 60-block.rules 0000644 00000001162 15063561400 0007135 0 ustar 00 # do not edit this file, it will be overwritten on update # enable in-kernel media-presence polling ACTION=="add", SUBSYSTEM=="module", KERNEL=="block", ATTR{parameters/events_dfl_poll_msecs}=="0", \ ATTR{parameters/events_dfl_poll_msecs}="2000" # forward scsi device event to corresponding block device ACTION=="change", SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST=="block", ATTR{block/*/uevent}="change" # watch metadata changes, caused by tools closing the device node which was opened for writing ACTION!="remove", SUBSYSTEM=="block", KERNEL=="loop*|nvme*|sd*|vd*|xvd*|pmem*|mmcblk*|dasd*", OPTIONS+="watch" 60-cdrom_id.rules 0000644 00000002057 15063561400 0007627 0 ustar 00 # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="cdrom_end" SUBSYSTEM!="block", GOTO="cdrom_end" KERNEL!="sr[0-9]*|vdisk*|xvd*", GOTO="cdrom_end" ENV{DEVTYPE}!="disk", GOTO="cdrom_end" # unconditionally tag device as CDROM KERNEL=="sr[0-9]*", ENV{ID_CDROM}="1" # stop automatically any mount units bound to the device if the media eject # button is pressed. ENV{ID_CDROM}=="1", ENV{SYSTEMD_MOUNT_DEVICE_BOUND}="1" # media eject button pressed ENV{DISK_EJECT_REQUEST}=="?*", RUN+="cdrom_id --eject-media $devnode", GOTO="cdrom_end" # import device and media properties and lock tray to # enable the receiving of media eject button events IMPORT{program}="cdrom_id --lock-media $devnode" # ejecting a CD does not remove the device node, so mark the systemd device # unit as inactive while there is no medium; this automatically cleans up of # stale mounts after ejecting ENV{DISK_MEDIA_CHANGE}=="?*", ENV{ID_CDROM_MEDIA}!="?*", ENV{SYSTEMD_READY}="0" KERNEL=="sr0", SYMLINK+="cdrom", OPTIONS+="link_priority=-100" LABEL="cdrom_end" 60-drm.rules 0000644 00000000635 15063561400 0006631 0 ustar 00 # do not edit this file, it will be overwritten on update ACTION!="remove", SUBSYSTEM=="drm", SUBSYSTEMS=="pci|usb|platform", IMPORT{builtin}="path_id" # by-path ENV{ID_PATH}=="?*", KERNEL=="card*", SYMLINK+="dri/by-path/$env{ID_PATH}-card" ENV{ID_PATH}=="?*", KERNEL=="controlD*", SYMLINK+="dri/by-path/$env{ID_PATH}-control" ENV{ID_PATH}=="?*", KERNEL=="renderD*", SYMLINK+="dri/by-path/$env{ID_PATH}-render" 60-evdev.rules 0000644 00000001716 15063561400 0007161 0 ustar 00 # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="evdev_end" KERNEL!="event*", GOTO="evdev_end" # skip later rules when we find something for this input device IMPORT{builtin}="hwdb --subsystem=input --lookup-prefix=evdev:", \ RUN{builtin}+="keyboard", GOTO="evdev_end" # AT keyboard matching by the machine's DMI data DRIVERS=="atkbd", \ IMPORT{builtin}="hwdb 'evdev:atkbd:$attr{[dmi/id]modalias}'", \ RUN{builtin}+="keyboard", GOTO="evdev_end" # device matching the input device name + properties + the machine's DMI data KERNELS=="input*", IMPORT{builtin}="hwdb 'evdev:name:$attr{name}:phys:$attr{phys}:ev:$attr{capabilities/ev}:$attr{[dmi/id]modalias}'", \ RUN{builtin}+="keyboard", GOTO="evdev_end" # device matching the input device name and the machine's DMI data KERNELS=="input*", IMPORT{builtin}="hwdb 'evdev:name:$attr{name}:$attr{[dmi/id]modalias}'", \ RUN{builtin}+="keyboard", GOTO="evdev_end" LABEL="evdev_end" 60-fido-id.rules 0000644 00000000245 15063561400 0007357 0 ustar 00 # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="fido_id_end" SUBSYSTEM=="hidraw", IMPORT{program}="fido_id" LABEL="fido_id_end" 60-input-id.rules 0000644 00000000432 15063561400 0007573 0 ustar 00 # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="id_input_end" SUBSYSTEM=="input", ENV{ID_INPUT}=="", IMPORT{builtin}="input_id" SUBSYSTEM=="input", IMPORT{builtin}="hwdb --subsystem=input --lookup-prefix=id-input:modalias:" LABEL="id_input_end" 63-scsi-sg3_symlink.rules 0000644 00000005505 15063561400 0011254 0 ustar 00 # SCSI-ID symlinks for sg3_utils ACTION=="remove", GOTO="sg3_utils_symlink_end" SUBSYSTEM!="block", GOTO="sg3_utils_symlink_end" # Skip symlink generation for multipath ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="sg3_utils_symlink_end" # Select which identifier to use per default # 0: vpd page 0x80 identifier ENV{SCSI_IDENT_SERIAL}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-S$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_SERIAL}" ENV{SCSI_IDENT_SERIAL}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-S$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_SERIAL}-part%n" # NAA identifier (prefix 3) # 1: IEEE Registered Extended first ENV{SCSI_IDENT_LUN_NAA_REGEXT}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_REGEXT}" ENV{SCSI_IDENT_LUN_NAA_REGEXT}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_REGEXT}-part%n" # 2: IEEE Registered ENV{SCSI_IDENT_LUN_NAA_REG}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_REG}" ENV{SCSI_IDENT_LUN_NAA_REG}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_REG}-part%n" # 3: IEEE Extended ENV{SCSI_IDENT_LUN_NAA_EXT}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_EXT}" ENV{SCSI_IDENT_LUN_NAA_EXT}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_EXT}-part%n" # 4: EUI-64 identifer (prefix 2) ENV{SCSI_IDENT_LUN_EUI64}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-2$env{SCSI_IDENT_LUN_EUI64}" ENV{SCSI_IDENT_LUN_EUI64}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-2$env{SCSI_IDENT_LUN_EUI64}-part%n" # 5: SCSI name identifier (prefix 8) ENV{SCSI_IDENT_LUN_NAME}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-8$env{SCSI_IDENT_LUN_NAME}" ENV{SCSI_IDENT_LUN_NAME}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-8$env{SCSI_IDENT_LUN_NAME}-part%n" # 6: T10 Vendor identifer (prefix 1) ENV{SCSI_IDENT_LUN_T10}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-1$env{SCSI_IDENT_LUN_T10}" ENV{SCSI_IDENT_LUN_T10}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-1$env{SCSI_IDENT_LUN_T10}-part%n" # 7: IEEE Locally assigned ENV{SCSI_IDENT_LUN_NAA_LOCAL}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_LOCAL}" ENV{SCSI_IDENT_LUN_NAA_LOCAL}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_LOCAL}-part%n" # 8: Vendor-specific identifier (prefix 0) ENV{SCSI_IDENT_LUN_VENDOR}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-0$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_LUN_VENDOR}" ENV{SCSI_IDENT_LUN_VENDOR}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-0$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_LUN_VENDOR}-part%n" LABEL="sg3_utils_symlink_end" 60-persistent-alsa.rules 0000644 00000001150 15063561400 0011156 0 ustar 00 # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="persistent_alsa_end" SUBSYSTEM!="sound", GOTO="persistent_alsa_end" KERNEL!="controlC[0-9]*", GOTO="persistent_alsa_end" SUBSYSTEMS=="usb", ENV{ID_MODEL}=="", IMPORT{builtin}="usb_id" ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="?*", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}" ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}" IMPORT{builtin}="path_id" ENV{ID_PATH}=="?*", SYMLINK+="snd/by-path/$env{ID_PATH}" LABEL="persistent_alsa_end" 98-kexec.rules 0000644 00000001267 15063561400 0007163 0 ustar 00 SUBSYSTEM=="cpu", ACTION=="add", GOTO="kdump_reload" SUBSYSTEM=="cpu", ACTION=="remove", GOTO="kdump_reload" SUBSYSTEM=="memory", ACTION=="online", GOTO="kdump_reload" SUBSYSTEM=="memory", ACTION=="offline", GOTO="kdump_reload" GOTO="kdump_reload_end" LABEL="kdump_reload" # If kdump is not loaded, calling kdump-udev-throttle will end up # doing nothing, but systemd-run will always generate extra logs for # each call, so trigger the kdump-udev-throttler only if kdump # service is active to avoid unnecessary logs RUN+="/bin/sh -c '/usr/bin/systemctl is-active kdump.service || exit 0; /usr/bin/systemd-run --quiet --no-block /usr/lib/udev/kdump-udev-throttler'" LABEL="kdump_reload_end" 60-persistent-input.rules 0000644 00000005226 15063561400 0011405 0 ustar 00 # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="persistent_input_end" SUBSYSTEM!="input", GOTO="persistent_input_end" SUBSYSTEMS=="bluetooth", ENV{ID_BUS}="bluetooth", GOTO="persistent_input_end" # Bluetooth devices don't always have the bluetooth subsystem ATTRS{id/bustype}=="0005", ENV{ID_BUS}="bluetooth", GOTO="persistent_input_end" SUBSYSTEMS=="rmi4", ENV{ID_BUS}="rmi" SUBSYSTEMS=="serio", ENV{ID_BUS}="i8042" SUBSYSTEMS=="usb", ENV{ID_BUS}=="", IMPORT{builtin}="usb_id" # determine class name for persistent symlinks ENV{ID_INPUT_KEYBOARD}=="?*", ENV{.INPUT_CLASS}="kbd" ENV{ID_INPUT_MOUSE}=="?*", ENV{.INPUT_CLASS}="mouse" ENV{ID_INPUT_TOUCHPAD}=="?*", ENV{.INPUT_CLASS}="mouse" ENV{ID_INPUT_TABLET}=="?*", ENV{.INPUT_CLASS}="mouse" ENV{ID_INPUT_JOYSTICK}=="?*", ENV{.INPUT_CLASS}="joystick" DRIVERS=="pcspkr", ENV{.INPUT_CLASS}="spkr" ATTRS{name}=="*dvb*|*DVB*|* IR *", ENV{.INPUT_CLASS}="ir" # fill empty serial number ENV{.INPUT_CLASS}=="?*", ENV{ID_SERIAL}=="", ENV{ID_SERIAL}="noserial" # by-id links KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="|00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{.INPUT_CLASS}" KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="?*", ATTRS{bInterfaceNumber}!="00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$attr{bInterfaceNumber}-$env{.INPUT_CLASS}" KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="|00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-$env{.INPUT_CLASS}" KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="?*", ATTRS{bInterfaceNumber}!="00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$attr{bInterfaceNumber}-event-$env{.INPUT_CLASS}" # allow empty class for USB devices, by appending the interface number SUBSYSTEMS=="usb", ENV{ID_BUS}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="", ATTRS{bInterfaceNumber}=="?*", \ SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-if$attr{bInterfaceNumber}" # by-path SUBSYSTEMS=="pci|usb|platform|acpi", IMPORT{builtin}="path_id" ENV{ID_PATH}=="?*", KERNEL=="mouse*|js*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-$env{.INPUT_CLASS}" ENV{ID_PATH}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-event-$env{.INPUT_CLASS}" # allow empty class for platform and usb devices; platform supports only a single interface that way SUBSYSTEMS=="usb|platform", ENV{ID_PATH}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="", \ SYMLINK+="input/by-path/$env{ID_PATH}-event" LABEL="persistent_input_end" 40-usb-blacklist.rules 0000644 00000000711 15063561400 0010577 0 ustar 00 # # Blacklist specific USB devices # # don't inquire sn and di on broken devices (https://bugzilla.suse.com/show_bug.cgi?id=840054) ACTION!="add|change", GOTO="usb_blacklist_end" KERNEL!="sd*[!0-9]|sr*", GOTO="usb_blacklist_end" # unkown device ATTRS{idVendor}=="0aec", ATTRS{idProduct}=="3260", ENV{ID_SCSI_INQUIRY}="1" # Sony/JMicron port replicator ATTRS{idVendor}=="054c", ATTRS{idProduct}=="06a0", ENV{ID_SCSI_INQUIRY}="1" LABEL="usb_blacklist_end" 60-persistent-storage-tape.rules 0000644 00000003164 15063561400 0012640 0 ustar 00 # do not edit this file, it will be overwritten on update # persistent storage links: /dev/tape/{by-id,by-path} ACTION=="remove", GOTO="persistent_storage_tape_end" ENV{UDEV_DISABLE_PERSISTENT_STORAGE_RULES_FLAG}=="1", GOTO="persistent_storage_tape_end" # type 8 devices are "Medium Changers" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{program}="scsi_id --sg-version=3 --export --whitelisted -d $devnode", \ SYMLINK+="tape/by-id/scsi-$env{ID_SERIAL}" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{builtin}="path_id", \ SYMLINK+="tape/by-path/$env{ID_PATH}-changer" SUBSYSTEM!="scsi_tape", GOTO="persistent_storage_tape_end" KERNEL=="st*[0-9]|nst*[0-9]", ATTRS{ieee1394_id}=="?*", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_BUS}="ieee1394" KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id" KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", KERNELS=="[0-9]*:*[0-9]", ENV{.BSG_DEV}="$root/bsg/$id" KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --whitelisted --export --device=$env{.BSG_DEV}", ENV{ID_BUS}="scsi" KERNEL=="st*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}" KERNEL=="nst*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}-nst" # by-path (parent device path) KERNEL=="st*[0-9]|nst*[0-9]", IMPORT{builtin}="path_id" KERNEL=="st*[0-9]", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}" KERNEL=="nst*[0-9]", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}-nst" LABEL="persistent_storage_tape_end" 11-dm-lvm.rules 0000444 00000004570 15063561400 0007237 0 ustar 00 # Copyright (C) 2009 Red Hat, Inc. All rights reserved. # # This file is part of LVM2. # Udev rules for LVM. # # These rules create symlinks for LVM logical volumes in # /dev/VG directory (VG is an actual VG name). Some udev # environment variables are set (they can be used in later # rules as well): # DM_LV_NAME - logical volume name # DM_VG_NAME - volume group name # DM_LV_LAYER - logical volume layer (blank if not set) # "add" event is processed on coldplug only! ACTION!="add|change", GOTO="lvm_end" ENV{DM_UDEV_RULES_VSN}!="?*", GOTO="lvm_end" ENV{DM_UUID}!="LVM-?*", GOTO="lvm_end" # Use DM name and split it up into its VG/LV/layer constituents. IMPORT{program}="/usr/sbin/dmsetup splitname --nameprefixes --noheadings --rows $env{DM_NAME}" # DM_SUBSYSTEM_UDEV_FLAG0 is the 'NOSCAN' flag for LVM subsystem. # This flag is used to temporarily disable selected rules to prevent any # processing or scanning done on the LVM volume before LVM has any chance # to zero any stale metadata found within the LV data area. Such stale # metadata could cause false claim of the LV device, keeping it open etc. # # If the NOSCAN flag is present, backup selected existing flags used to # disable rules, then set them firmly so those selected rules are surely skipped. # Restore these flags once the NOSCAN flag is dropped (which is normally any # uevent that follows for this LV, even an artificially generated one). ENV{DM_SUBSYSTEM_UDEV_FLAG0}=="1", ENV{DM_NOSCAN}="1", ENV{DM_DISABLE_OTHER_RULES_FLAG_OLD}="$env{DM_UDEV_DISABLE_OTHER_RULES_FLAG}", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}="1" ENV{DM_SUBSYSTEM_UDEV_FLAG0}!="1", IMPORT{db}="DM_NOSCAN", IMPORT{db}="DM_DISABLE_OTHER_RULES_FLAG_OLD" ENV{DM_SUBSYSTEM_UDEV_FLAG0}!="1", ENV{DM_NOSCAN}=="1", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}="$env{DM_DISABLE_OTHER_RULES_FLAG_OLD}", \ ENV{DM_DISABLE_OTHER_RULES_FLAG_OLD}="", ENV{DM_NOSCAN}="" ENV{DM_UDEV_DISABLE_SUBSYSTEM_RULES_FLAG}=="1", GOTO="lvm_end" # Do not create symlinks for inappropriate subdevices. ENV{DM_LV_NAME}=="pvmove?*|?*_vorigin", GOTO="lvm_disable" ENV{DM_LV_LAYER}=="?*", GOTO="lvm_disable" # Create symlinks for top-level devices only. ENV{DM_VG_NAME}=="?*", ENV{DM_LV_NAME}=="?*", SYMLINK+="$env{DM_VG_NAME}/$env{DM_LV_NAME}", GOTO="lvm_end" LABEL="lvm_disable" ENV{DM_UDEV_DISABLE_DISK_RULES_FLAG}="1" ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}="1" OPTIONS:="nowatch" LABEL="lvm_end" 60-persistent-storage.rules 0000644 00000014600 15063561400 0011706 0 ustar 00 # do not edit this file, it will be overwritten on update # persistent storage links: /dev/disk/{by-id,by-uuid,by-label,by-path} # scheme based on "Linux persistent device names", 2004, Hannes Reinecke <hare@suse.de> ACTION=="remove", GOTO="persistent_storage_end" ENV{UDEV_DISABLE_PERSISTENT_STORAGE_RULES_FLAG}=="1", GOTO="persistent_storage_end" SUBSYSTEM!="block", GOTO="persistent_storage_end" KERNEL!="loop*|mmcblk*[0-9]|msblk*[0-9]|mspblk*[0-9]|nvme*|sd*|sr*|vd*|xvd*|bcache*|cciss*|dasd*|ubd*|scm*|pmem*|nbd*", GOTO="persistent_storage_end" # ignore partitions that span the entire disk TEST=="whole_disk", GOTO="persistent_storage_end" # for partitions import parent information ENV{DEVTYPE}=="partition", IMPORT{parent}="ID_*" # NVMe KERNEL=="nvme*[0-9]n*[0-9]", ATTR{wwid}=="?*", SYMLINK+="disk/by-id/nvme-$attr{wwid}" KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{wwid}=="?*", SYMLINK+="disk/by-id/nvme-$attr{wwid}-part%n" KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{serial}=="?*", ENV{ID_SERIAL_SHORT}="$attr{serial}" KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{wwid}=="?*", ENV{ID_WWN}="$attr{wwid}" KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{model}=="?*", ENV{ID_MODEL}="$attr{model}" KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_MODEL}=="?*", ENV{ID_SERIAL_SHORT}=="?*", \ ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}" KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{serial}=="?*", ENV{ID_SERIAL_SHORT}="$attr{serial}" KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{model}=="?*", ENV{ID_MODEL}="$attr{model}" KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ENV{ID_MODEL}=="?*", ENV{ID_SERIAL_SHORT}=="?*", \ ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}-part%n" # virtio-blk KERNEL=="vd*[!0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}" KERNEL=="vd*[0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}-part%n" # ATA KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{vendor}=="ATA", IMPORT{program}="ata_id --export $devnode" # ATAPI devices (SPC-3 or later) KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{type}=="5", ATTRS{scsi_level}=="[6-9]*", IMPORT{program}="ata_id --export $devnode" # Run ata_id on non-removable USB Mass Storage (SATA/PATA disks in enclosures) KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", ATTR{removable}=="0", SUBSYSTEMS=="usb", IMPORT{program}="ata_id --export $devnode" # Fall back usb_id for USB devices KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id" # SCSI devices KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $devnode", ENV{ID_BUS}="scsi" KERNEL=="cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $devnode", ENV{ID_BUS}="cciss" KERNEL=="sd*|sr*|cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}" KERNEL=="sd*|cciss*", ENV{DEVTYPE}=="partition", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n" # FireWire KERNEL=="sd*[!0-9]|sr*", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}" KERNEL=="sd*[0-9]", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}-part%n" # MMC KERNEL=="mmcblk[0-9]", SUBSYSTEMS=="mmc", ATTRS{name}=="?*", ATTRS{serial}=="?*", \ ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}" KERNEL=="mmcblk[0-9]p[0-9]*", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}-part%n" # UBI-MTD SUBSYSTEM=="ubi", KERNEL=="ubi*_*", ATTRS{mtd_num}=="*", SYMLINK+="ubi_mtd%s{mtd_num}_%s{name}" # Memstick KERNEL=="msblk[0-9]|mspblk[0-9]", SUBSYSTEMS=="memstick", ATTRS{name}=="?*", ATTRS{serial}=="?*", \ ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}" KERNEL=="msblk[0-9]p[0-9]|mspblk[0-9]p[0-9]", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}-part%n" # by-path ENV{DEVTYPE}=="disk", DEVPATH!="*/virtual/*", IMPORT{builtin}="path_id" KERNEL=="mmcblk[0-9]boot[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-boot%n" KERNEL!="mmcblk[0-9]boot[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}" ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n" # legacy virtio-pci by-path links (deprecated) KERNEL=="vd*[!0-9]", ENV{ID_PATH}=="pci-*", SYMLINK+="disk/by-path/virtio-$env{ID_PATH}" KERNEL=="vd*[0-9]", ENV{ID_PATH}=="pci-*", SYMLINK+="disk/by-path/virtio-$env{ID_PATH}-part%n" # probe filesystem metadata of optical drives which have a media inserted KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="?*", \ IMPORT{builtin}="blkid --offset=$env{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}" # single-session CDs do not have ID_CDROM_MEDIA_SESSION_LAST_OFFSET KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="", \ IMPORT{builtin}="blkid --noraid" # probe filesystem metadata of disks KERNEL!="sr*", IMPORT{builtin}="blkid" # by-label/by-uuid links (filesystem metadata) ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}" ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}" # by-id (World Wide Name) ENV{DEVTYPE}=="disk", ENV{ID_WWN_WITH_EXTENSION}=="?*", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}" ENV{DEVTYPE}=="partition", ENV{ID_WWN_WITH_EXTENSION}=="?*", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}-part%n" # by-partlabel/by-partuuid links (partition metadata) ENV{ID_PART_ENTRY_UUID}=="?*", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}" ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_NAME}=="?*", SYMLINK+="disk/by-partlabel/$env{ID_PART_ENTRY_NAME}" LABEL="persistent_storage_end" 69-dm-lvm-metad.rules 0000444 00000013305 15063561400 0010340 0 ustar 00 # Copyright (C) 2012 Red Hat, Inc. All rights reserved. # # This file is part of LVM2. # Udev rules for LVM. # # This rule requires blkid to be called on block devices before so only devices # used as LVM PVs are processed (ID_FS_TYPE="LVM2_member" or "LVM1_member"). SUBSYSTEM!="block", GOTO="lvm_end" ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="lvm_end" # Detect removed PV label by comparing previous ID_FS_TYPE value with current one. ENV{.ID_FS_TYPE_NEW}="$env{ID_FS_TYPE}" IMPORT{db}="ID_FS_TYPE" ENV{ID_FS_TYPE}=="LVM2_member|LVM1_member", ENV{.ID_FS_TYPE_NEW}!="LVM2_member|LVM1_member", ENV{LVM_PV_GONE}="1" ENV{ID_FS_TYPE}="$env{.ID_FS_TYPE_NEW}" ENV{LVM_PV_GONE}=="1", GOTO="lvm_scan" # Only process devices already marked as a PV - this requires blkid to be called before. ENV{ID_FS_TYPE}!="LVM2_member|LVM1_member", GOTO="lvm_end" ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="lvm_end" ACTION=="remove", GOTO="lvm_scan" # Create /dev/disk/by-id/lvm-pv-uuid-<PV_UUID> symlink for each PV ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-id/lvm-pv-uuid-$env{ID_FS_UUID_ENC}" # If the PV is a special device listed below, scan only if the device is # properly activated. These devices are not usable after an ADD event, # but they require an extra setup and they are ready after a CHANGE event. # Also support coldplugging with ADD event but only if the device is already # properly activated. # This logic should be eventually moved to rules where those particular # devices are processed primarily (MD and loop). # DM device: KERNEL!="dm-[0-9]*", GOTO="next" ENV{DM_UDEV_PRIMARY_SOURCE_FLAG}=="1", ENV{DM_ACTIVATION}=="1", GOTO="lvm_scan" GOTO="lvm_end" # MD device: LABEL="next" KERNEL!="md[0-9]*", GOTO="next" IMPORT{db}="LVM_MD_PV_ACTIVATED" ACTION=="add", ENV{LVM_MD_PV_ACTIVATED}=="1", GOTO="lvm_scan" ACTION=="change", ENV{LVM_MD_PV_ACTIVATED}!="1", TEST=="md/array_state", ENV{LVM_MD_PV_ACTIVATED}="1", GOTO="lvm_scan" ACTION=="add", KERNEL=="md[0-9]*p[0-9]*", GOTO="lvm_scan" ENV{LVM_MD_PV_ACTIVATED}!="1", ENV{SYSTEMD_READY}="0" GOTO="lvm_end" # Loop device: LABEL="next" KERNEL!="loop[0-9]*", GOTO="next" ACTION=="add", ENV{LVM_LOOP_PV_ACTIVATED}=="1", GOTO="lvm_scan" ACTION=="change", ENV{LVM_LOOP_PV_ACTIVATED}!="1", TEST=="loop/backing_file", ENV{LVM_LOOP_PV_ACTIVATED}="1", GOTO="lvm_scan" ENV{LVM_LOOP_PV_ACTIVATED}!="1", ENV{SYSTEMD_READY}="0" GOTO="lvm_end" # If the PV is not a special device listed above, scan only if necessary. # For "systemd_background" mode, systemd takes care of this by activating # the lvm2-pvscan@.service only once. LABEL="next" ACTION!="add|change", GOTO="lvm_end" LABEL="lvm_scan" ENV{SYSTEMD_READY}="1" # The method for invoking pvscan is selected at build time with the option # --(enable|disable)-udev-systemd-background-jobs to "configure". # On modern distributions with recent systemd, it's "systemd_background"; # on others, "direct_pvscan". GOTO="systemd_background" LABEL="systemd_background" # The table below summarises the situations in which we reach the LABEL="lvm_scan" # in the "systemd_background" case. # Marked by X, X* means only if the special dev is properly set up. # The artificial ADD is supported for coldplugging. We avoid running the pvscan # on artificial CHANGE so there's no unexpected autoactivation when WATCH rule fires. # N.B. MD and loop never actually reaches lvm_scan on REMOVE as the PV label is gone # within a CHANGE event (these are caught by the "LVM_PV_GONE" rule at the beginning). # # In this case, we simply set up the dependency between the device and the pvscan # job using SYSTEMD_ALIAS (which sets up a simplified device identifier that # allows using "BindsTo" in the systemd unit file) and SYSTEMD_WANTS (which tells # systemd to start the pvscan job once the device is ready). # We need to set these variables for both "add" and "change" events, otherwise # systemd may loose information about the device/unit dependencies. # # | real ADD | real CHANGE | artificial ADD | artificial CHANGE | REMOVE # ============================================================================= # DM | | X | X* | | X # MD | | X | X* | | # loop | | X | X* | | # other | X | X | X | | X ACTION!="remove", ENV{LVM_PV_GONE}=="1", RUN+="/usr/bin/systemd-run /usr/sbin/lvm pvscan --cache $major:$minor", GOTO="lvm_end" ENV{SYSTEMD_ALIAS}="/dev/block/$major:$minor" ENV{SYSTEMD_WANTS}+="lvm2-pvscan@$major:$minor.service" GOTO="lvm_end" # FIXME: this mode is not used and should be removed. LABEL="direct_pvscan" # The table below summarises the situations in which we reach the LABEL="lvm_scan" # for the "direct_pvscan" case. # Marked by X, X* means only if the special dev is properly set up. # The artificial ADD is supported for coldplugging. We avoid running the pvscan # on artificial CHANGE so there's no unexpected autoactivation when WATCH rule fires. # # In this case, we need to make sure that pvscan is not invoked spuriously, therefore # we invoke it only for "add" events for "other" devices. # # | real ADD | real CHANGE | artificial ADD | artificial CHANGE | REMOVE # ============================================================================= # DM | | X | X* | | X # MD | | X | X* | | # loop | | X | X* | | # other | X | | X | | X RUN+="/usr/sbin/lvm pvscan --background --cache --activate ay --major $major --minor $minor", ENV{LVM_SCANNED}="1" LABEL="lvm_end" 60-persistent-v4l.rules 0000644 00000001401 15063561400 0010742 0 ustar 00 # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="persistent_v4l_end" SUBSYSTEM!="video4linux", GOTO="persistent_v4l_end" ENV{MAJOR}=="", GOTO="persistent_v4l_end" IMPORT{program}="v4l_id $devnode" SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id" KERNEL=="video*", ENV{ID_SERIAL}=="?*", SYMLINK+="v4l/by-id/$env{ID_BUS}-$env{ID_SERIAL}-video-index$attr{index}" # check for valid "index" number TEST!="index", GOTO="persistent_v4l_end" ATTR{index}!="?*", GOTO="persistent_v4l_end" IMPORT{builtin}="path_id" ENV{ID_PATH}=="?*", KERNEL=="video*|vbi*", SYMLINK+="v4l/by-path/$env{ID_PATH}-video-index$attr{index}" ENV{ID_PATH}=="?*", KERNEL=="audio*", SYMLINK+="v4l/by-path/$env{ID_PATH}-audio-index$attr{index}" LABEL="persistent_v4l_end" 60-sensor.rules 0000644 00000001327 15063561400 0007357 0 ustar 00 # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="sensor_end" # device matching the sensor's name and the machine's DMI data for IIO devices SUBSYSTEM=="iio", KERNEL=="iio*", SUBSYSTEMS=="usb|i2c", \ IMPORT{builtin}="hwdb 'sensor:modalias:$attr{modalias}:$attr{[dmi/id]modalias}'", \ GOTO="sensor_end" SUBSYSTEM=="input", ENV{ID_INPUT_ACCELEROMETER}=="1", SUBSYSTEMS=="acpi", \ IMPORT{builtin}="hwdb 'sensor:modalias:acpi:$attr{hid}:$attr{[dmi/id]modalias}'", \ GOTO="sensor_end" SUBSYSTEM=="input", ENV{ID_INPUT_ACCELEROMETER}=="1", SUBSYSTEMS=="platform", \ IMPORT{builtin}="hwdb 'sensor:modalias:platform:$id:$attr{[dmi/id]modalias}'", \ GOTO="sensor_end" LABEL="sensor_end" 60-serial.rules 0000644 00000002246 15063561400 0007326 0 ustar 00 # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="serial_end" SUBSYSTEM!="tty", GOTO="serial_end" SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}" SUBSYSTEMS=="pci", IMPORT{builtin}="hwdb --subsystem=pci" SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb" # /dev/serial/by-path/, /dev/serial/by-id/ for USB devices KERNEL!="ttyUSB[0-9]*|ttyACM[0-9]*", GOTO="serial_end" SUBSYSTEMS=="usb-serial", ENV{.ID_PORT}="$attr{port_number}" IMPORT{builtin}="path_id" ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="", SYMLINK+="serial/by-path/$env{ID_PATH}" ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="?*", SYMLINK+="serial/by-path/$env{ID_PATH}-port$env{.ID_PORT}" IMPORT{builtin}="usb_id" ENV{ID_SERIAL}=="", GOTO="serial_end" SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACE_NUM}="$attr{bInterfaceNumber}" ENV{ID_USB_INTERFACE_NUM}=="", GOTO="serial_end" ENV{.ID_PORT}=="", SYMLINK+="serial/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$env{ID_USB_INTERFACE_NUM}" ENV{.ID_PORT}=="?*", SYMLINK+="serial/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$env{ID_USB_INTERFACE_NUM}-port$env{.ID_PORT}" LABEL="serial_end" 64-btrfs.rules 0000644 00000001150 15063561400 0007164 0 ustar 00 # do not edit this file, it will be overwritten on update SUBSYSTEM!="block", GOTO="btrfs_end" ACTION=="remove", GOTO="btrfs_end" ENV{ID_FS_TYPE}!="btrfs", GOTO="btrfs_end" ENV{SYSTEMD_READY}=="0", GOTO="btrfs_end" # let the kernel know about this btrfs filesystem, and check if it is complete IMPORT{builtin}="btrfs ready $devnode" # mark the device as not ready to be used by the system ENV{ID_BTRFS_READY}=="0", ENV{SYSTEMD_READY}="0" # reconsider pending devices in case when multidevice volume awaits ENV{ID_BTRFS_READY}=="1", RUN+="/usr/bin/udevadm trigger -s block -p ID_BTRFS_READY=0" LABEL="btrfs_end" 70-joystick.rules 0000644 00000000660 15063561400 0007705 0 ustar 00 # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="joystick_end" ENV{ID_INPUT_JOYSTICK}=="", GOTO="joystick_end" KERNEL!="event*", GOTO="joystick_end" # joystick:<bustype>:v<vid>p<pid>:name:<name>:* KERNELS=="input*", ENV{ID_BUS}!="", \ IMPORT{builtin}="hwdb 'joystick:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \ GOTO="joystick_end" LABEL="joystick_end" 70-mouse.rules 0000644 00000001336 15063561400 0007177 0 ustar 00 # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="mouse_end" KERNEL!="event*", GOTO="mouse_end" ENV{ID_INPUT_MOUSE}=="", GOTO="mouse_end" # mouse:<subsystem>:v<vid>p<pid>:name:<name>:* KERNELS=="input*", ENV{ID_BUS}=="usb", \ IMPORT{builtin}="hwdb 'mouse:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \ GOTO="mouse_end" KERNELS=="input*", ENV{ID_BUS}=="bluetooth", \ IMPORT{builtin}="hwdb 'mouse:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \ GOTO="mouse_end" DRIVERS=="psmouse", SUBSYSTEMS=="serio", \ IMPORT{builtin}="hwdb 'mouse:ps2::name:$attr{device/name}:'", \ GOTO="mouse_end" LABEL="mouse_end" 71-biosdevname.rules 0000644 00000001743 15063561400 0010346 0 ustar 00 SUBSYSTEM!="net", GOTO="netdevicename_end" ACTION!="add", GOTO="netdevicename_end" NAME=="?*", GOTO="netdevicename_end" ATTR{type}!="1", GOTO="netdevicename_end" ENV{DEVTYPE}=="?*", GOTO="netdevicename_end" # kernel command line "biosdevname={0|1}" can turn off/on biosdevname IMPORT{cmdline}="biosdevname" ENV{biosdevname}=="?*", ENV{UDEV_BIOSDEVNAME}="$env{biosdevname}" # ENV{UDEV_BIOSDEVNAME} can be used for blacklist/whitelist # but will be overwritten by the kernel command line argument ENV{UDEV_BIOSDEVNAME}=="0", GOTO="netdevicename_end" ENV{UDEV_BIOSDEVNAME}=="1", GOTO="netdevicename_start" # off by default GOTO="netdevicename_end" LABEL="netdevicename_start" # using NAME= instead of setting INTERFACE_NAME, so that persistent # names aren't generated for these devices, they are "named" on each boot. SUBSYSTEMS=="pci", PROGRAM="/sbin/biosdevname --smbios 2.6 --nopirq --policy physical -i %k", NAME="%c" OPTIONS+="string_escape=replace" LABEL="netdevicename_end" 70-power-switch.rules 0000644 00000001070 15063561400 0010475 0 ustar 00 # SPDX-License-Identifier: LGPL-2.1+ # # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. ACTION=="remove", GOTO="power_switch_end" SUBSYSTEM=="input", KERNEL=="event*", ENV{ID_INPUT_SWITCH}=="1", TAG+="power-switch" SUBSYSTEM=="input", KERNEL=="event*", ENV{ID_INPUT_KEY}=="1", TAG+="power-switch" LABEL="power_switch_end" 70-touchpad.rules 0000644 00000000731 15063561400 0007654 0 ustar 00 # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="touchpad_end" ENV{ID_INPUT}=="", GOTO="touchpad_end" ENV{ID_INPUT_TOUCHPAD}=="", GOTO="touchpad_end" KERNEL!="event*", GOTO="touchpad_end" # touchpad:<subsystem>:v<vid>p<pid>:name:<name>:* KERNELS=="input*", ENV{ID_BUS}!="", \ IMPORT{builtin}="hwdb 'touchpad:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \ GOTO="touchpad_end" LABEL="touchpad_end" 70-uaccess.rules 0000644 00000005157 15063561401 0007503 0 ustar 00 # SPDX-License-Identifier: LGPL-2.1+ # # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. ACTION=="remove", GOTO="uaccess_end" ENV{MAJOR}=="", GOTO="uaccess_end" # PTP/MTP protocol devices, cameras, portable media players SUBSYSTEM=="usb", ENV{ID_USB_INTERFACES}=="*:060101:*", TAG+="uaccess" # Digicams with proprietary protocol ENV{ID_GPHOTO2}=="?*", TAG+="uaccess" # SCSI and USB scanners ENV{libsane_matched}=="yes", TAG+="uaccess" # HPLIP devices (necessary for ink level check and HP tool maintenance) ENV{ID_HPLIP}=="1", TAG+="uaccess" # optical drives SUBSYSTEM=="block", ENV{ID_CDROM}=="1", TAG+="uaccess" SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", TAG+="uaccess" # Sound devices SUBSYSTEM=="sound", TAG+="uaccess", \ OPTIONS+="static_node=snd/timer", OPTIONS+="static_node=snd/seq" # ffado is an userspace driver for firewire sound cards SUBSYSTEM=="firewire", ENV{ID_FFADO}=="1", TAG+="uaccess" # Webcams, frame grabber, TV cards SUBSYSTEM=="video4linux", TAG+="uaccess" SUBSYSTEM=="dvb", TAG+="uaccess" # IIDC devices: industrial cameras and some webcams SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x00010*", TAG+="uaccess" SUBSYSTEM=="firewire", ATTR{units}=="*0x00b09d:0x00010*", TAG+="uaccess" # AV/C devices: camcorders, set-top boxes, TV sets, audio devices, and more SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x010001*", TAG+="uaccess" SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x014001*", TAG+="uaccess" # DRI video devices SUBSYSTEM=="drm", KERNEL=="card*", TAG+="uaccess" # smart-card readers ENV{ID_SMARTCARD_READER}=="?*", TAG+="uaccess" # (USB) authentication devices ENV{ID_SECURITY_TOKEN}=="?*", TAG+="uaccess" # PDA devices ENV{ID_PDA}=="?*", TAG+="uaccess" # Programmable remote control ENV{ID_REMOTE_CONTROL}=="1", TAG+="uaccess" # joysticks SUBSYSTEM=="input", ENV{ID_INPUT_JOYSTICK}=="?*", TAG+="uaccess" # color measurement devices ENV{COLOR_MEASUREMENT_DEVICE}=="?*", TAG+="uaccess" # DDC/CI device, usually high-end monitors such as the DreamColor ENV{DDC_DEVICE}=="?*", TAG+="uaccess" # media player raw devices (for user-mode drivers, Android SDK, etc.) SUBSYSTEM=="usb", ENV{ID_MEDIA_PLAYER}=="?*", TAG+="uaccess" # software-defined radio communication devices ENV{ID_SOFTWARE_RADIO}=="?*", TAG+="uaccess" # 3D printers, CNC machines, laser cutters, 3D scanners, etc. ENV{ID_MAKER_TOOL}=="?*", TAG+="uaccess" LABEL="uaccess_end" 71-seat.rules 0000644 00000005306 15063561401 0007006 0 ustar 00 # SPDX-License-Identifier: LGPL-2.1+ # # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. ACTION=="remove", GOTO="seat_end" TAG=="uaccess", SUBSYSTEM!="sound", TAG+="seat" SUBSYSTEM=="sound", KERNEL=="card*", TAG+="seat" SUBSYSTEM=="input", KERNEL=="input*", TAG+="seat" SUBSYSTEM=="graphics", KERNEL=="fb[0-9]*", TAG+="seat", TAG+="master-of-seat" SUBSYSTEM=="drm", KERNEL=="card[0-9]*", TAG+="seat", TAG+="master-of-seat" SUBSYSTEM=="usb", ATTR{bDeviceClass}=="09", TAG+="seat" # 'Plugable' USB hub, sound, network, graphics adapter SUBSYSTEM=="usb", ATTR{idVendor}=="2230", ATTR{idProduct}=="000[13]", ENV{ID_AUTOSEAT}="1" # qemu (version 2.4+) has a PCI-PCI bridge (-device pci-bridge-seat) to group # devices belonging to one seat. See: # http://git.qemu.org/?p=qemu.git;a=blob;f=docs/multiseat.txt SUBSYSTEM=="pci", ATTR{vendor}=="0x1b36", ATTR{device}=="0x000a", TAG+="seat", ENV{ID_AUTOSEAT}="1" # Mimo 720, with integrated USB hub, displaylink graphics, and e2i # touchscreen. This device carries no proper VID/PID in the USB hub, # but it does carry good ID data in the graphics component, hence we # check it from the parent. There's a bit of a race here however, # given that the child devices might not exist yet at the time this # rule is executed. To work around this we'll trigger the parent from # the child if we notice that the parent wasn't recognized yet. # Match parent SUBSYSTEM=="usb", ATTR{idVendor}=="058f", ATTR{idProduct}=="6254", \ ATTR{%k.2/idVendor}=="17e9", ATTR{%k.2/idProduct}=="401a", ATTR{%k.2/product}=="mimo inc", \ ENV{ID_AUTOSEAT}="1", ENV{ID_AVOID_LOOP}="1" # Match child, look for parent's ID_AVOID_LOOP SUBSYSTEM=="usb", ATTR{idVendor}=="17e9", ATTR{idProduct}=="401a", ATTR{product}=="mimo inc", \ ATTR{../idVendor}=="058f", ATTR{../idProduct}=="6254", \ IMPORT{parent}="ID_AVOID_LOOP" # Match child, retrigger parent SUBSYSTEM=="usb", ATTR{idVendor}=="17e9", ATTR{idProduct}=="401a", ATTR{product}=="mimo inc", \ ATTR{../idVendor}=="058f", ATTR{../idProduct}=="6254", \ ENV{ID_AVOID_LOOP}=="", \ RUN+="/usr/bin/udevadm trigger --parent-match=%p/.." TAG=="seat", ENV{ID_PATH}=="", IMPORT{builtin}="path_id" TAG=="seat", ENV{ID_FOR_SEAT}=="", ENV{ID_PATH_TAG}!="", ENV{ID_FOR_SEAT}="$env{SUBSYSTEM}-$env{ID_PATH_TAG}" SUBSYSTEM=="input", ATTR{name}=="Wiebetech LLC Wiebetech", RUN+="/usr/bin/loginctl lock-sessions" LABEL="seat_end" 73-idrac.rules 0000644 00000000474 15063561401 0007137 0 ustar 00 # do not edit this file, it will be overwritten on update # On Dell PowerEdge systems, the iDRAC7 and later support a USB Virtual NIC # with terminates in the iDRAC. Help identify this with 'idrac' ACTION=="add", SUBSYSTEM=="net", SUBSYSTEMS=="usb", ATTRS{idVendor}=="413c", ATTRS{idProduct}=="a102", NAME="idrac" 73-seat-late.rules 0000644 00000001174 15063561401 0007732 0 ustar 00 # SPDX-License-Identifier: LGPL-2.1+ # # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. ACTION=="remove", GOTO="seat_late_end" ENV{ID_SEAT}=="", ENV{ID_AUTOSEAT}=="1", ENV{ID_FOR_SEAT}!="", ENV{ID_SEAT}="seat-$env{ID_FOR_SEAT}" ENV{ID_SEAT}=="", IMPORT{parent}="ID_SEAT" ENV{ID_SEAT}!="", TAG+="$env{ID_SEAT}" TAG=="uaccess", ENV{MAJOR}!="", RUN{builtin}+="uaccess" LABEL="seat_late_end" 71-prefixdevname.rules 0000644 00000000623 15063561401 0010704 0 ustar 00 # Do not edit this file, it will be overwritten on updates SUBSYSTEM!="net", GOTO="net_ifnames_prefix_end" ACTION!="add", GOTO="net_ifnames_prefix_end" ATTR{type}!="1", GOTO="net_ifnames_prefix_end" IMPORT{cmdline}="net.ifnames.prefix" ENV{net.ifnames.prefix}!="?*", GOTO="net_ifnames_prefix_end" PROGRAM="/usr/lib/udev/prefixdevname", RESULT=="?*", NAME="$result" LABEL="net_ifnames_prefix_end" 75-net-description.rules 0000644 00000000704 15063561401 0011162 0 ustar 00 # do not edit this file, it will be overwritten on update ACTION=="remove", GOTO="net_end" SUBSYSTEM!="net", GOTO="net_end" IMPORT{builtin}="net_id" SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb" SUBSYSTEMS=="usb", GOTO="net_end" SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}" SUBSYSTEMS=="pci", IMPORT{builtin}="hwdb --subsystem=pci" LABEL="net_end" 75-probe_mtd.rules 0000644 00000000256 15063561401 0010030 0 ustar 00 # do not edit this file, it will be overwritten on update ACTION!="add", GOTO="mtd_probe_end" KERNEL=="mtd*ro", IMPORT{program}="mtd_probe $devnode" LABEL="mtd_probe_end" 78-sound-card.rules 0000644 00000011320 15063561401 0010111 0 ustar 00 # do not edit this file, it will be overwritten on update SUBSYSTEM!="sound", GOTO="sound_end" ACTION=="add|change", KERNEL=="controlC*", ATTR{../uevent}="change" ACTION!="change", GOTO="sound_end" # Ok, we probably need a little explanation here for what the two lines above # are good for. # # The story goes like this: when ALSA registers a new sound card it emits a # series of 'add' events to userspace, for the main card device and for all the # child device nodes that belong to it. udev relays those to applications, # however only maintains the order between father and child, but not between # the siblings. The control device node creation can be used as synchronization # point. All other devices that belong to a card are created in the kernel # before it. However unfortunately due to the fact that siblings are forwarded # out of order by udev this fact is lost to applications. # # OTOH before an application can open a device it needs to make sure that all # its device nodes are completely created and set up. # # As a workaround for this issue we have added the udev rule above which will # generate a 'change' event on the main card device from the 'add' event of the # card's control device. Due to the ordering semantics of udev this event will # only be relayed after all child devices have finished processing properly. # When an application needs to listen for appearing devices it can hence look # for 'change' events only, and ignore the actual 'add' events. # # When the application is initialized at the same time as a device is plugged # in it may need to figure out if the 'change' event has already been triggered # or not for a card. To find that out we store the flag environment variable # SOUND_INITIALIZED on the device which simply tells us if the card 'change' # event has already been processed. KERNEL!="card*", GOTO="sound_end" ENV{SOUND_INITIALIZED}="1" IMPORT{builtin}="hwdb" SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id" SUBSYSTEMS=="usb", GOTO="skip_pci" SUBSYSTEMS=="firewire", ATTRS{guid}=="?*", \ ENV{ID_BUS}="firewire", ENV{ID_SERIAL}="$attr{guid}", ENV{ID_SERIAL_SHORT}="$attr{guid}", \ ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{model}", \ ENV{ID_VENDOR}="$attr{vendor_name}", ENV{ID_MODEL}="$attr{model_name}" SUBSYSTEMS=="firewire", GOTO="skip_pci" SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}" SUBSYSTEMS=="pci", GOTO="skip_pci" # If we reach here, the device nor any of its parents are USB/PCI/firewire bus devices. # If we now find a parent that is a platform device, assume that we're working with # an internal sound card. SUBSYSTEMS=="platform", ENV{SOUND_FORM_FACTOR}="internal", GOTO="sound_end" LABEL="skip_pci" # Define ID_ID if ID_BUS and ID_SERIAL are set. This will work for both # USB and firewire. ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="?*", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}" ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}" IMPORT{builtin}="path_id" # The values used here for $SOUND_FORM_FACTOR and $SOUND_CLASS should be kept # in sync with those defined for PulseAudio's src/pulse/proplist.h # PA_PROP_DEVICE_FORM_FACTOR, PA_PROP_DEVICE_CLASS properties. # If the first PCM device of this card has the pcm class 'modem', then the card is a modem ATTR{pcmC%nD0p/pcm_class}=="modem", ENV{SOUND_CLASS}="modem", GOTO="sound_end" # Identify cards on the internal PCI bus as internal SUBSYSTEMS=="pci", DEVPATH=="*/0000:00:??.?/sound/*", ENV{SOUND_FORM_FACTOR}="internal", GOTO="sound_end" # Devices that also support Image/Video interfaces are most likely webcams SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACES}=="*:0e????:*", ENV{SOUND_FORM_FACTOR}="webcam", GOTO="sound_end" # Matching on the model strings is a bit ugly, I admit ENV{ID_MODEL}=="*[Ss]peaker*", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end" ENV{ID_MODEL_FROM_DATABASE}=="*[Ss]peaker*", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end" ENV{ID_MODEL}=="*[Hh]eadphone*", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end" ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]eadphone*", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end" ENV{ID_MODEL}=="*[Hh]eadset*", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end" ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]eadset*", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end" ENV{ID_MODEL}=="*[Hh]andset*", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end" ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]andset*", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end" ENV{ID_MODEL}=="*[Mm]icrophone*", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end" ENV{ID_MODEL_FROM_DATABASE}=="*[Mm]icrophone*", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end" LABEL="sound_end" 80-drivers.rules 0000644 00000001147 15063561401 0007527 0 ustar 00 # do not edit this file, it will be overwritten on update ACTION!="add", GOTO="drivers_end" ENV{MODALIAS}=="?*", RUN{builtin}+="kmod load $env{MODALIAS}" SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="SD", RUN{builtin}+="kmod load tifm_sd" SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="MS", RUN{builtin}+="kmod load tifm_ms" SUBSYSTEM=="memstick", RUN{builtin}+="kmod load ms_block mspro_block" SUBSYSTEM=="i2o", RUN{builtin}+="kmod load i2o_block" SUBSYSTEM=="module", KERNEL=="parport_pc", RUN{builtin}+="kmod load ppdev" KERNEL=="mtd*ro", ENV{MTD_FTL}=="smartmedia", RUN{builtin}+="kmod load sm_ftl" LABEL="drivers_end" 90-iprutils.rules 0000644 00000000106 15063561401 0007717 0 ustar 00 DRIVERS=="ipr", TAG+="systemd", ENV{SYSTEMD_WANTS}+="iprutils.target" 80-net-setup-link.rules 0000644 00000000444 15063561401 0010727 0 ustar 00 # do not edit this file, it will be overwritten on update SUBSYSTEM!="net", GOTO="net_setup_link_end" IMPORT{builtin}="path_id" ACTION!="add", GOTO="net_setup_link_end" IMPORT{builtin}="net_setup_link" NAME=="", ENV{ID_NET_NAME}!="", NAME="$env{ID_NET_NAME}" LABEL="net_setup_link_end" 90-vconsole.rules 0000644 00000000776 15063561401 0007711 0 ustar 00 # SPDX-License-Identifier: LGPL-2.1+ # # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. # Each vtcon keeps its own state of fonts. # ACTION=="add", SUBSYSTEM=="vtconsole", KERNEL=="vtcon*", ATTR{name}!="*dummy device", RUN+="/usr/lib/systemd/systemd-vconsole-setup" 99-systemd.rules 0000644 00000010417 15063561401 0007553 0 ustar 00 # SPDX-License-Identifier: LGPL-2.1+ # # This file is part of systemd. # # systemd is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2.1 of the License, or # (at your option) any later version. ACTION=="remove", GOTO="systemd_end" SUBSYSTEM=="tty", KERNEL=="tty[a-zA-Z]*|hvc*|xvc*|hvsi*|ttysclp*|sclp_line*|3270/tty[0-9]*", TAG+="systemd" KERNEL=="vport*", TAG+="systemd" SUBSYSTEM=="ubi", TAG+="systemd" SUBSYSTEM=="block", TAG+="systemd" SUBSYSTEM=="block", ACTION=="add", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", ENV{SYSTEMD_READY}="0" # Ignore encrypted devices with no identified superblock on it, since # we are probably still calling mke2fs or mkswap on it. SUBSYSTEM=="block", ENV{DM_UUID}=="CRYPT-*", ENV{ID_PART_TABLE_TYPE}=="", ENV{ID_FS_USAGE}=="", ENV{SYSTEMD_READY}="0" # add symlink to GPT root disk SUBSYSTEM=="block", ENV{ID_PART_GPT_AUTO_ROOT}=="1", ENV{ID_FS_TYPE}!="crypto_LUKS", SYMLINK+="gpt-auto-root" SUBSYSTEM=="block", ENV{ID_PART_GPT_AUTO_ROOT}=="1", ENV{ID_FS_TYPE}=="crypto_LUKS", SYMLINK+="gpt-auto-root-luks" SUBSYSTEM=="block", ENV{DM_UUID}=="CRYPT-*", ENV{DM_NAME}=="root", SYMLINK+="gpt-auto-root" # Ignore raid devices that are not yet assembled and started SUBSYSTEM=="block", ENV{DEVTYPE}=="disk", KERNEL=="md*", TEST!="md/array_state", ENV{SYSTEMD_READY}="0" SUBSYSTEM=="block", ENV{DEVTYPE}=="disk", KERNEL=="md*", ATTR{md/array_state}=="|clear|inactive", ENV{SYSTEMD_READY}="0" # Ignore loop devices that don't have any file attached SUBSYSTEM=="block", KERNEL=="loop[0-9]*", ENV{DEVTYPE}=="disk", TEST!="loop/backing_file", ENV{SYSTEMD_READY}="0" # Ignore nbd devices until the PID file exists (which signals a connected device) SUBSYSTEM=="block", KERNEL=="nbd*", ENV{DEVTYPE}=="disk", TEST!="pid", ENV{SYSTEMD_READY}="0" # We need a hardware independent way to identify network devices. We # use the /sys/subsystem/ path for this. Kernel "bus" and "class" names # should be treated as one namespace, like udev handles it. This is mostly # just an identification string for systemd, so whether the path actually is # accessible or not does not matter as long as it is unique and in the # filesystem namespace. # # http://cgit.freedesktop.org/systemd/systemd/tree/src/libudev/libudev-enumerate.c#n955 SUBSYSTEM=="net", KERNEL!="lo", TAG+="systemd", ENV{SYSTEMD_ALIAS}+="/sys/subsystem/net/devices/$name" SUBSYSTEM=="bluetooth", TAG+="systemd", ENV{SYSTEMD_ALIAS}+="/sys/subsystem/bluetooth/devices/%k" SUBSYSTEM=="bluetooth", TAG+="systemd", ENV{SYSTEMD_WANTS}+="bluetooth.target" ENV{ID_SMARTCARD_READER}=="?*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="smartcard.target" SUBSYSTEM=="sound", KERNEL=="card*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sound.target" SUBSYSTEM=="printer", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target" SUBSYSTEM=="usb", KERNEL=="lp*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target" SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target" # Apply sysctl variables to network devices (and only to those) as they appear. ACTION=="add", SUBSYSTEM=="net", KERNEL!="lo", RUN+="/usr/lib/systemd/systemd-sysctl --prefix=/net/ipv4/conf/$name --prefix=/net/ipv4/neigh/$name --prefix=/net/ipv6/conf/$name --prefix=/net/ipv6/neigh/$name" # Pull in backlight save/restore for all backlight devices and # keyboard backlights SUBSYSTEM=="backlight", TAG+="systemd", IMPORT{builtin}="path_id", ENV{SYSTEMD_WANTS}+="systemd-backlight@backlight:$name.service" SUBSYSTEM=="leds", KERNEL=="*kbd_backlight", TAG+="systemd", IMPORT{builtin}="path_id", ENV{SYSTEMD_WANTS}+="systemd-backlight@leds:$name.service" # Pull in rfkill save/restore for all rfkill devices SUBSYSTEM=="rfkill", ENV{SYSTEMD_RFKILL}="1" SUBSYSTEM=="rfkill", IMPORT{builtin}="path_id" SUBSYSTEM=="misc", KERNEL=="rfkill", TAG+="systemd", ENV{SYSTEMD_WANTS}+="systemd-rfkill.socket" # Asynchronously mount file systems implemented by these modules as soon as they are loaded. SUBSYSTEM=="module", KERNEL=="fuse", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sys-fs-fuse-connections.mount" SUBSYSTEM=="module", KERNEL=="configfs", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sys-kernel-config.mount" LABEL="systemd_end" 84-nm-drivers.rules 0000644 00000001025 15063561401 0010136 0 ustar 00 # Do not modify this file, it will get overwritten on updates. # To override or extend the rules place a file in /etc/udev/rules.d SUBSYSTEM!="net", GOTO="nm_drivers_end" ACTION!="add|change|move", GOTO="nm_drivers_end" # Determine ID_NET_DRIVER if there's no ID_NET_DRIVER or DRIVERS (old udev?) ENV{ID_NET_DRIVER}=="?*", GOTO="nm_drivers_end" DRIVERS=="?*", GOTO="nm_drivers_end" PROGRAM="/bin/sh -c '/usr/sbin/ethtool -i $$1 |/usr/bin/sed -n s/^driver:\ //p' -- $env{INTERFACE}", ENV{ID_NET_DRIVER}="%c" LABEL="nm_drivers_end" 63-md-raid-arrays.rules 0000644 00000005107 15063561401 0010666 0 ustar 00 # do not edit this file, it will be overwritten on update SUBSYSTEM!="block", GOTO="md_end" # handle md arrays ACTION=="remove", GOTO="md_end" KERNEL!="md*", GOTO="md_end" # partitions have no md/{array_state,metadata_version}, but should not # for that reason be ignored. ENV{DEVTYPE}=="partition", GOTO="md_ignore_state" # container devices have a metadata version of e.g. 'external:ddf' and # never leave state 'inactive' ATTR{md/metadata_version}=="external:[A-Za-z]*", ATTR{md/array_state}=="inactive", GOTO="md_ignore_state" TEST!="md/array_state", ENV{SYSTEMD_READY}="0", GOTO="md_end" ATTR{md/array_state}=="clear*|inactive", ENV{SYSTEMD_READY}="0", GOTO="md_end" ATTR{md/sync_action}=="reshape", ENV{RESHAPE_ACTIVE}="yes" LABEL="md_ignore_state" IMPORT{program}="/usr/sbin/mdadm --detail --no-devices --export $devnode" ENV{DEVTYPE}=="disk", ENV{MD_NAME}=="?*", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}", OPTIONS+="string_escape=replace" ENV{DEVTYPE}=="disk", ENV{MD_UUID}=="?*", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}" ENV{DEVTYPE}=="disk", ENV{MD_DEVNAME}=="?*", SYMLINK+="md/$env{MD_DEVNAME}" ENV{DEVTYPE}=="partition", ENV{MD_NAME}=="?*", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}-part%n", OPTIONS+="string_escape=replace" ENV{DEVTYPE}=="partition", ENV{MD_UUID}=="?*", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}-part%n" ENV{DEVTYPE}=="partition", ENV{MD_DEVNAME}=="*[^0-9]", SYMLINK+="md/$env{MD_DEVNAME}%n" ENV{DEVTYPE}=="partition", ENV{MD_DEVNAME}=="*[0-9]", SYMLINK+="md/$env{MD_DEVNAME}p%n" IMPORT{builtin}="blkid" OPTIONS+="link_priority=100" OPTIONS+="watch" ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}" ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_PART_ENTRY_UUID}=="?*", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}" ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}" ENV{MD_LEVEL}=="raid[1-9]*", ENV{SYSTEMD_WANTS}+="mdmonitor.service" # Tell systemd to run mdmon for our container, if we need it. ENV{MD_LEVEL}=="raid[1-9]*", ENV{MD_CONTAINER}=="?*", PROGRAM="/usr/bin/readlink $env{MD_CONTAINER}", ENV{MD_MON_THIS}="%c" ENV{MD_MON_THIS}=="?*", TEST=="/etc/initrd-release", PROGRAM="/usr/bin/basename $env{MD_MON_THIS}", ENV{SYSTEMD_WANTS}+="mdmon@initrd-%c.service" ENV{MD_MON_THIS}=="?*", TEST!="/etc/initrd-release", PROGRAM="/usr/bin/basename $env{MD_MON_THIS}", ENV{SYSTEMD_WANTS}+="mdmon@%c.service" ENV{RESHAPE_ACTIVE}=="yes", PROGRAM="/usr/bin/basename $env{MD_MON_THIS}", ENV{SYSTEMD_WANTS}+="mdadm-grow-continue@%c.service" LABEL="md_end" 85-nm-unmanaged.rules 0000644 00000003735 15063561401 0010432 0 ustar 00 # Do not modify this file, it will get overwritten on updates. # To override or extend the rules place a file in /etc/udev/rules.d SUBSYSTEM!="net", GOTO="nm_unmanaged_end" ACTION!="add|change|move", GOTO="nm_unmanaged_end" # VirtualBox host networking. Out-of-tree driver that looks like an ordinary # Ethernet. No parent device (lives in /virtual/), no support for ethtool # to identify the driver, MAC address defaults to 08:00:27:, but can be # changed. Interface name will have to do, it's always vboxnet*. ENV{INTERFACE}=="vboxnet[0-9]*", ENV{NM_UNMANAGED}="1" # VMWare host networking. Out-of-tree driver that looks like an ordinary # Ethernet. No parent device (lives in /virtual/), no support for # ethtool to identify the driver. They have their own MAC prefix that # can not be changed. ATTR{address}=="00:50:56:*", ENV{INTERFACE}=="vmnet[0-9]*", ENV{NM_UNMANAGED}="1" # Parallels Workstation host networking. Out-of-tree driver that looks like # an ordinary Ethernet. No parent device (lives in /virtual/), no support for # ethtool to identify the driver and the interface name is too generic. # However, they have their own MAC prefix that can not be changed. ATTR{address}=="00:1c:42:*", ENV{INTERFACE}=="vnic[0-9]*", ENV{NM_UNMANAGED}="1" # Virtual Ethernet device pair. Often used to communicate with a peer interface # in another net namespace and managed by libvirt, Docker or the like. # Generally we don't want to mess with those. One exception would be the # full system containers, like LXC or LXD. LXC containers run via libvirt # don't use udev, so this doesn't apply. LXD does, though. To deal with the # LXD situation, let's treat the devices called eth* as regular ethernet. ENV{ID_NET_DRIVER}=="veth", ENV{INTERFACE}!="eth[0-9]*", ENV{NM_UNMANAGED}="1" # USB gadget device. Unmanage by default, since whatever created it # might want to set it up itself (e.g. activate an ipv4.method=shared # connection). ENV{DEVTYPE}=="gadget", ENV{NM_UNMANAGED}="1" LABEL="nm_unmanaged_end" 01-md-raid-creating.rules 0000644 00000000501 15063561401 0011142 0 ustar 00 # do not edit this file, it will be overwritten on update # While mdadm is creating an array, it creates a file # /run/mdadm/creating-mdXXX. If that file exists, then # the array is not "ready" and we should make sure the # content is ignored. KERNEL=="md*", TEST=="/run/mdadm/creating-$kernel", ENV{SYSTEMD_READY}="0" 90-nm-thunderbolt.rules 0000644 00000001114 15063561401 0011006 0 ustar 00 # Do not modify this file, it will get overwritten on updates. # To override or extend the rules place a file in /etc/udev/rules.d ACTION!="add|change|move", GOTO="nm_thunderbolt_end" # Load he thunderbolt-net driver if we a device of type thunderbolt_xdomain # is added. SUBSYSTEM=="thunderbolt", ENV{DEVTYPE}=="thunderbolt_xdomain", RUN{builtin}+="kmod load thunderbolt-net" # For all thunderbolt network devices, we want to enable link-local configuration SUBSYSTEM=="net", ENV{ID_NET_DRIVER}=="thunderbolt-net", ENV{NM_AUTO_DEFAULT_LINK_LOCAL_ONLY}="1" LABEL="nm_thunderbolt_end" 60-net.rules 0000644 00000000201 15063561401 0006623 0 ustar 00 ACTION=="add", SUBSYSTEM=="net", DRIVERS=="?*", ATTR{type}=="1", PROGRAM="/lib/udev/rename_device", RESULT=="?*", NAME="$result" 60-tpm-udev.rules 0000644 00000000323 15063561401 0007603 0 ustar 00 # tpm devices can only be accessed by the tss user but the tss # group members can access tpmrm devices KERNEL=="tpm[0-9]*", MODE="0660", OWNER="tss" KERNEL=="tpmrm[0-9]*", MODE="0660", OWNER="tss", GROUP="tss" 90-fwupd-devices.rules 0000644 00000000431 15063561401 0010612 0 ustar 00 ######################################################################## # Copyright (C) 2015 Richard Hughes <richard@hughsie.com> # # SPDX-License-Identifier: LGPL-2.1+ # # NVMe hardware SUBSYSTEM=="nvme", ENV{ID_VENDOR_FROM_DATABASE}=="", IMPORT{builtin}="hwdb --subsystem=pci" 69-md-clustered-confirm-device.rules 0000644 00000001532 15063561401 0013336 0 ustar 00 # do not edit this file, it will be overwritten on update SUBSYSTEM!="block", GOTO="clustermd_end" # handle md arrays KERNEL!="md*", GOTO="clustermd_end" ENV{DEVTYPE}!="disk", GOTO="clustermd_end" ACTION!="change", GOTO="clustermd_end" ENV{EVENT}!="ADD_DEVICE", GOTO="clustermd_end" ENV{DEVICE_UUID}!="?*", GOTO="clustermd_end" ENV{RAID_DISK}!="?*", GOTO="clustermd_end" # Based on the received UUID, node confirms the device if # it is found by blkid, otherwise the node reports it is # missing. PROGRAM="/usr/sbin/blkid -o device -t UUID_SUB=$env{DEVICE_UUID}", ENV{.md.newdevice} = "$result" ENV{.md.newdevice}!="", RUN+="/usr/sbin/mdadm --manage $env{DEVNAME} --cluster-confirm $env{RAID_DISK}:$env{.md.newdevice}" ENV{.md.newdevice}=="", RUN+="/usr/sbin/mdadm --manage $env{DEVNAME} --cluster-confirm $env{RAID_DISK}:missing" LABEL="clustermd_end" 80-udisks2.rules 0000644 00000022214 15063561401 0007433 0 ustar 00 # This file contains udev rules for udisks 2.x # # Do not edit this file, it will be overwritten on updates # # ------------------------------------------------------------------------ # Probing # ------------------------------------------------------------------------ # Skip probing if not a block device or if requested by other rules # SUBSYSTEM!="block", GOTO="udisks_probe_end" ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="udisks_probe_end" ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="?*", GOTO="udisks_probe_end" # MD-RAID (aka Linux Software RAID) members # # TODO: file bug against mdadm(8) to have --export-prefix option that can be used with e.g. UDISKS_MD_MEMBER # SUBSYSTEM=="block", ENV{ID_FS_USAGE}=="raid", ENV{ID_FS_TYPE}=="linux_raid_member", ENV{UDISKS_MD_MEMBER_LEVEL}=="", IMPORT{program}="/bin/sh -c '/sbin/mdadm --examine --export $tempnode | /bin/sed s/^MD_/UDISKS_MD_MEMBER_/g'" SUBSYSTEM=="block", KERNEL=="md*", ENV{DEVTYPE}!="partition", IMPORT{program}="/bin/sh -c '/sbin/mdadm --detail --export $tempnode | /bin/sed s/^MD_/UDISKS_MD_/g'" LABEL="udisks_probe_end" # ------------------------------------------------------------------------ # Tag floppy drives since they need special care # PC floppy drives # KERNEL=="fd*", ENV{ID_DRIVE_FLOPPY}="1" # USB floppy drives # SUBSYSTEMS=="usb", ATTRS{bInterfaceClass}=="08", ATTRS{bInterfaceSubClass}=="04", ENV{ID_DRIVE_FLOPPY}="1" # ATA Zip drives # ENV{ID_VENDOR}=="*IOMEGA*", ENV{ID_MODEL}=="*ZIP*", ENV{ID_DRIVE_FLOPPY_ZIP}="1" # TODO: figure out if the drive supports SD and SDHC and what the current # kind of media is - right now we just assume SD KERNEL=="mmcblk[0-9]", SUBSYSTEMS=="mmc", ENV{DEVTYPE}=="disk", ENV{ID_DRIVE_FLASH_SD}="1", ENV{ID_DRIVE_MEDIA_FLASH_SD}="1" # ditto for memstick KERNEL=="msblk[0-9]|mspblk[0-9]", SUBSYSTEMS=="memstick", ENV{DEVTYPE}=="disk", ENV{ID_DRIVE_FLASH_MS}="1", ENV{ID_DRIVE_MEDIA_FLASH_MS}="1" # TODO: maybe automatically convert udisks1 properties to udisks2 ones? # (e.g. UDISKS_PRESENTATION_HIDE -> UDISKS_IGNORE) # ------------------------------------------------------------------------ # ------------------------------------------------------------------------ # ------------------------------------------------------------------------ # Whitelist for tagging drives with the property media type. # TODO: figure out where to store this database SUBSYSTEMS=="usb", ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0248", ENV{ID_INSTANCE}=="0:0", ENV{ID_DRIVE_FLASH_CF}="1" SUBSYSTEMS=="usb", ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0248", ENV{ID_INSTANCE}=="0:1", ENV{ID_DRIVE_FLASH_MS}="1" SUBSYSTEMS=="usb", ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0248", ENV{ID_INSTANCE}=="0:2", ENV{ID_DRIVE_FLASH_SM}="1" SUBSYSTEMS=="usb", ATTRS{idVendor}=="050d", ATTRS{idProduct}=="0248", ENV{ID_INSTANCE}=="0:3", ENV{ID_DRIVE_FLASH_SD}="1" SUBSYSTEMS=="usb", ATTRS{idVendor}=="05e3", ATTRS{idProduct}=="070e", ENV{ID_INSTANCE}=="0:0", ENV{ID_DRIVE_FLASH_CF}="1" SUBSYSTEMS=="usb", ATTRS{idVendor}=="05e3", ATTRS{idProduct}=="070e", ENV{ID_INSTANCE}=="0:1", ENV{ID_DRIVE_FLASH_SM}="1" SUBSYSTEMS=="usb", ATTRS{idVendor}=="05e3", ATTRS{idProduct}=="070e", ENV{ID_INSTANCE}=="0:2", ENV{ID_DRIVE_FLASH_SD}="1" SUBSYSTEMS=="usb", ATTRS{idVendor}=="05e3", ATTRS{idProduct}=="070e", ENV{ID_INSTANCE}=="0:3", ENV{ID_DRIVE_FLASH_MS}="1" # APPLE SD Card Reader (MacbookPro5,4) # SUBSYSTEMS=="usb", ATTRS{idVendor}=="05ac", ATTRS{idProduct}=="8403", ENV{ID_DRIVE_FLASH_SD}="1" # Realtek card readers DRIVERS=="rts_pstor", ENV{ID_DRIVE_FLASH_SD}="1" DRIVERS=="rts5229", ENV{ID_DRIVE_FLASH_SD}="1" # Lexar Dual Slot USB 3.0 Reader Professional SUBSYSTEMS=="usb", ENV{ID_VENDOR_ID}=="05dc",ENV{ID_MODEL_ID}=="b049", ENV{ID_INSTANCE}=="0:0", ENV{ID_DRIVE_FLASH_CF}="1" SUBSYSTEMS=="usb", ENV{ID_VENDOR_ID}=="05dc",ENV{ID_MODEL_ID}=="b049", ENV{ID_INSTANCE}=="0:1", ENV{ID_DRIVE_FLASH_SD}="1" # Transcend USB 3.0 Multi-Card Reader (TS-RDF8K) SUBSYSTEMS=="usb", ENV{ID_VENDOR_ID}=="8564",ENV{ID_MODEL_ID}=="4000", ENV{ID_INSTANCE}=="0:0", ENV{ID_DRIVE_FLASH_CF}="1" SUBSYSTEMS=="usb", ENV{ID_VENDOR_ID}=="8564",ENV{ID_MODEL_ID}=="4000", ENV{ID_INSTANCE}=="0:1", ENV{ID_DRIVE_FLASH_SD}="1" SUBSYSTEMS=="usb", ENV{ID_VENDOR_ID}=="8564",ENV{ID_MODEL_ID}=="4000", ENV{ID_INSTANCE}=="0:2", ENV{ID_DRIVE_FLASH_MS}="1" # Common theme # SUBSYSTEMS=="usb", ENV{ID_MODEL}=="*Reader*SD*", ENV{ID_DRIVE_FLASH_SD}="1" SUBSYSTEMS=="usb", ENV{ID_MODEL}=="*CF_Reader*", ENV{ID_DRIVE_FLASH_CF}="1" SUBSYSTEMS=="usb", ENV{ID_MODEL}=="*SM_Reader*", ENV{ID_DRIVE_FLASH_SM}="1" SUBSYSTEMS=="usb", ENV{ID_MODEL}=="*MS_Reader*", ENV{ID_DRIVE_FLASH_MS}="1" # USB stick / thumb drives # SUBSYSTEMS=="usb", ENV{ID_VENDOR}=="*Kingston*", ENV{ID_MODEL}=="*DataTraveler*", ENV{ID_DRIVE_THUMB}="1" SUBSYSTEMS=="usb", ENV{ID_VENDOR}=="*SanDisk*", ENV{ID_MODEL}=="*Cruzer*", ENV{ID_CDROM}!="1", ENV{ID_DRIVE_THUMB}="1" SUBSYSTEMS=="usb", ENV{ID_VENDOR}=="HP", ENV{ID_MODEL}=="*v125w*", ENV{ID_DRIVE_THUMB}="1" SUBSYSTEMS=="usb", ENV{ID_VENDOR_ID}=="13fe", ENV{ID_MODEL}=="*Patriot*", ENV{ID_DRIVE_THUMB}="1" SUBSYSTEMS=="usb", ENV{ID_VENDOR}=="*JetFlash*", ENV{ID_MODEL}=="*Transcend*", ENV{ID_DRIVE_THUMB}="1" # SD-Card reader in Chromebook Pixel SUBSYSTEMS=="usb", ENV{ID_VENDOR_ID}=="05e3", ENV{ID_MODEL_ID}=="0727", ENV{ID_DRIVE_FLASH_SD}="1" # ------------------------------------------------------------------------ # ------------------------------------------------------------------------ # ------------------------------------------------------------------------ # Devices which should not be display in the user interface # # (note that RAID/LVM members are not normally shown in an user # interface so setting UDISKS_IGNORE at first does not seem to achieve # anything. However it helps for RAID/LVM members that are encrypted # using LUKS. See bug #51439.) # Apple Bootstrap partitions ENV{ID_PART_ENTRY_SCHEME}=="mac", ENV{ID_PART_ENTRY_TYPE}=="Apple_Bootstrap", ENV{UDISKS_IGNORE}="1" # Apple Boot partitions ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_TYPE}=="426f6f74-0000-11aa-aa11-00306543ecac", ENV{UDISKS_IGNORE}="1" # special DOS partition types (EFI, hidden, etc.) and RAID/LVM # see http://www.win.tue.nl/~aeb/partitions/partition_types-1.html ENV{ID_PART_ENTRY_SCHEME}=="dos", \ ENV{ID_PART_ENTRY_TYPE}=="0x0|0x11|0x12|0x14|0x16|0x17|0x1b|0x1c|0x1e|0x27|0x3d|0x84|0x8d|0x8e|0x90|0x91|0x92|0x93|0x97|0x98|0x9a|0x9b|0xbb|0xc2|0xc3|0xdd|0xef|0xfd", \ ENV{UDISKS_IGNORE}="1" # special GUID-identified partition types (EFI System Partition, BIOS Boot partition, RAID/LVM) # see http://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs ENV{ID_PART_ENTRY_SCHEME}=="gpt", \ ENV{ID_PART_ENTRY_TYPE}=="c12a7328-f81f-11d2-ba4b-00a0c93ec93b|21686148-6449-6e6f-744e-656564454649|a19d880f-05fc-4d3b-a006-743f0f84911e|e6d6d379-f507-44c2-a23c-238f2a3df928|e3c9e316-0b5c-4db8-817d-f92df00215ae|de94bba4-06d1-4d40-a16a-bfd50179d6ac", \ ENV{UDISKS_IGNORE}="1" # ZFS member partitions ENV{ID_PART_ENTRY_SCHEME}=="gpt", \ ENV{ID_FS_TYPE}=="zfs_member", ENV{ID_PART_ENTRY_TYPE}=="6a898cc3-1dd2-11b2-99a6-080020736631", \ ENV{UDISKS_IGNORE}="1" # MAC recovery/tool partitions/devices which are useless on Linux ENV{ID_PART_ENTRY_SCHEME}=="mac", \ ENV{ID_CDROM}=="?*", ENV{ID_FS_TYPE}=="udf", ENV{ID_FS_LABEL}=="WD*SmartWare", \ ENV{UDISKS_IGNORE}="1" ENV{ID_PART_TABLE_TYPE}=="mac", \ ENV{ID_CDROM}=="?*", ENV{ID_FS_TYPE}=="udf", ENV{ID_FS_LABEL}=="WD*SmartWare", \ ENV{UDISKS_IGNORE}="1" # recovery partitions ENV{ID_FS_TYPE}=="ntfs|vfat", \ ENV{ID_FS_LABEL}=="Recovery|RECOVERY|Lenovo_Recovery|HP_RECOVERY|Recovery_Partition|DellUtility|DellRestore|IBM_SERVICE|SERVICEV001|SERVICEV002|SYSTEM_RESERVED|System_Reserved|WINRE_DRV|DIAGS|IntelRST", \ ENV{UDISKS_IGNORE}="1" # read-only non-Linux software installer partitions ENV{ID_VENDOR}=="Sony", ENV{ID_MODEL}=="PRS*Launcher", ENV{UDISKS_IGNORE}="1" # non-Linux software KERNEL=="sr*", ENV{ID_VENDOR}=="SanDisk", ENV{ID_MODEL}=="Cruzer", ENV{ID_FS_LABEL}=="U3_System", ENV{UDISKS_IGNORE}="1" # Virtual Windows tools installation on Asus Zendisk (0b05:17b4) KERNEL=="sr*", ENV{ID_VENDOR}=="ASMT",ENV{ID_MODEL}=="VirtualCDROM", ENV{ID_FS_LABEL}=="ASUS_+Speed_ZENDISK*", ENV{UDISKS_IGNORE}="1" # Virtual Windows tools installation CD on Nokia 7 Plus (2e04:c025) KERNEL=="sr*", ENV{ID_VENDOR}=="Linux", ENV{ID_MODEL}=="File-CD_Gadget*", ENV{ID_FS_LABEL}=="CDROM*", ATTRS{manufacturer}=="HMD Global", ENV{UDISKS_IGNORE}="1" # Content created using isohybrid (typically used on CDs and USB # sticks for bootable media) is a bit special insofar that the # interesting content is on a DOS partition with type 0x00* ... which # is hidden above. So undo this. # # See http://mjg59.dreamwidth.org/11285.html for more details # # *) This is true only for 64bit images. For 32bit images the type is 0x17 # (Hidden HPFS/NTFS/exFAT). This is most likely a bug but we still need to # stop ignoring these. ENV{ID_PART_TABLE_TYPE}=="dos", ENV{ID_PART_ENTRY_TYPE}=="0x0|0x17", ENV{ID_PART_ENTRY_NUMBER}=="1|2", ENV{ID_FS_TYPE}=="iso9660|udf", ENV{UDISKS_IGNORE}="0" # Zram devices setup KERNEL=="zram[0-9]", ENV{SYSTEMD_WANTS}="zram-setup@zram%n.service", TAG+="systemd" # Explicitly ignore ram block devices, they don't work with udev KERNEL=="ram*", ENV{UDISKS_IGNORE}="1" 91-drm-modeset.rules 0000644 00000000070 15063561401 0010265 0 ustar 00 KERNEL=="controlD[0-9]*", SUBSYSTEM=="drm", MODE="0600" 99-nfs.rules 0000644 00000000137 15063561401 0006647 0 ustar 00 SUBSYSTEM=="bdi", ACTION=="add", PROGRAM="/usr/libexec/nfsrahead %k", ATTR{read_ahead_kb}="%c"
SonySec07 | MukoMuko Cyber Team | Ver3.2
